The oil hose connects to the pump cylinder. This part is an OEM from Husqvarna and Jonsered for chainsaws. Keep in mind that this part is sold individually. If this part breaks it can prevent oil from entering where it needs to go, so it will need to be replaced. A screwdriver and a socket set might be required during the replacement of this part.
Measured height of oil hose outlet and found it was below the mounting surface of the chain bar. This prevented 100% of oil from entering oil channel in bar. A new oil hose solved the issue. To remove clutch, just free it with a hammer and punch.
Did you find this story helpful?
Thank you for voting!
The oiler wouldnGÇÖt oil the bar anymore because I used to use canola oil and I think it hardened inside the piston.
I removed the bar and chain. Then popped the cover off the top of the saw removed the spark plug and put in this special piston stopper I got when I converted my saw to a chain saw carving saw. Then I put some vise grips clamped to the clutch used another wrench to turn the clutch till it came off. Removed the clutch and all the other inn
... Read moreer. Then removed the metal shield plate and got access to the piston and pump and oil tube thingy. Swapped all that out cleaned the old oil bar oil off and put it all back together the way I took it apart.
Took the bar and chain off, removed the clutch, and sprocket. Took out the Oiler pump assembly, drained, and thoroughly cleaned the oil tank. Reinstalled all the new parts, leak fixed. Runs great
removed chain guard, chain & chain bar, clutch, pin bearing sleeve, oil hose & any part that has been chaffed. cleaned out saw dust/oil build ups.replaced parts where needed.installed chain & bar. adjusted to. proper tension. lubed internal parts on the rebuild. gapped new spark plug & replaced. put in 50:1 gas mix & bar oil.
star
... Read moreted up saw & checked bar oil spray on a piece of cardboard. good as new !!
1 Removed chain,cover and bar
2 Removed recoil cover
3 Large end of spark plug wrench securely in vice other end on nut in middle of recoil (to hold so chain sprocket and clutch can be removed from other side of the saw)
4 Remove plate (1 screw)
5 Remove oil pump piston,pinion and oil hose
6 Reinstall new pu
... Read moremp piston, pinion and oil hose and reverse steps 4,3,2 and 1
removed the engine cover. Removed the spark plug. Installed the piston stop plug. Removed the chain and bar. Removed the clutch. Removed the clutch bearing and oil pump drive gear. Removed the chain guide plate and oil pump hose. Replaced the oil pump hose and the chain guide plate. The rest of the repair was the reverse of the tear down.
... Read more. This repair was made easy by having a clutch removal tool and a piston stop plug and 51 years of experience. NOTE !! The clutch has left hand threads. NOTE !! don\'t force anything. Note !! it was nice ordering the parts from people that knew just what I was talking about and they spoke perfect English. Thank You, Chuck
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/lawn-and-garden/chainsaw/hoses-and-tubes/"},{"position":2,"name":"544084202","title":"544084202","url":""}]
_WW_3.gif "Part Location Diagram of 544084202 Husqvarna Chainsaw oil pick-up hose")
_WW_3.gif "Part Location Diagram of 544084202 Husqvarna Chainsaw oil pick-up hose")
