This is an original part from Husqvarna. The starter pulley is designed for use with may chainsaw devices. The durable plastic component is fitted beside the recoil spring in the starter housing, securing the starter rope. A screwdriver is required for the replacement. The starter pulley is sold individually.
Troubleshooting
This part works with the following brands:
Husqvarna
Poulan
This part works with the following products:
Chainsaw
Part# 505303735 replaces these:
505303735,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed housing for recoil starter.
2. Used hex wrench to remove rope piles.
3. Lifted out broken recoil spring and placed new recoil spring.
4. Replaced rope pulley and tightened hex screw that retains the pulley.
5. Rewound starter rope onto pulley and then tightened pulley one full turn while looping starter
... Read moreone final time.
6. Replaced recoil starter onto chainsaw and tightened the four retaining screws.
7. Varoom. Saw starts just like new.
Read less
Did you find this story helpful?
Thank you for voting!
Starter rope was hard to pull and when it did come out it wouldn\'t retract.
Removed top cover. Then remove the worn parts. Removed the rope from the hand grip .Put the new pulley in place then the spring, put the rope in the pulley. Then wound the pulley and spring until I thought It was tight enough. Put the rope thru the housing and attached it to the hand grip. Tightened down cover and let the rope go slowly i
... Read moren
Removed four screws securing the case.
Removed Allen head screw to remove rope pull assembly.
Replaced the parts and wrapped the new rope around the pulley.
Threaded the rope through the eyelet on the case and wound the spring a couple more turns before inserting the rope through the handle and tying a knot. Replaced
... Read morethe case and four screws.
Works perfect.
1. I removed the old housing.2. I removed the pulley and coil spring.2. I threaded the rope and attached the handle. 3. Then I installed the new coil spring and inserted the pulley 4. Finally attached the housing.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8993935
Manufacturer Part Number: 505303735
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_9.gif "Part Location Diagram of 505303735 Husqvarna Starter Pulley")
_WW_9.gif "Part Location Diagram of 505303735 Husqvarna Starter Pulley")
