Part Location Diagram of 503890802 Husqvarna Knee Joint
See part D-7 in the diagram
( Grid squares measure 1x1 inch )

Knee Joint 503890802

Manufactured by:
Husqvarna
ERP Number:
ERP9282891
Part Number:
503890802
Original Equipment Manufacturer ?
  Works with your model  CS2255!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(3 rated repairs) ?
  Works with your model   CS2255!

Product Description

?

This knee joint is a genuine replacement part sourced directly from Husqvarna. It is compatible for use with many models of chainsaws. This knee joint It is made of metal and plastic. It should be replaced if it is broken. A screwdriver is needed for the replacement of this part. It does not include the pin (part 503892901).

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • RedMax
  • Craftsman
This part works with the following products:
  • Chainsaw
Part# 503890802 replaces these:
503890801, 503890802,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Failed to set brake properly before removing chainsaw cover

Richard from Robbinsville, New Jersey

13 of 13 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
503890802
Read carefully the owner\'s manual procedure for removing cover BEFORE removing cover from chainsaw! Or, watch you tube video for proper procedure--it would have saved me from needing this replacement part. Not having done either, after prying the cover off to get at the actual chain saw, it became quite obvious that the cover was not g oing to back in place without some tool to reset the safety brake which had not been properly set before disassembly. Brute force was not the answer. Broke the plastic spring guide ( aka knee joint) in several attempts to force said spring back in place. Frustration led to you tube videos in what not to do and what one should do. Improvised sprocket to reset the brake and used the replacement knee joint to effect the repair. Took 20 minutes to make the tool, and five minutes to put the assembly back together.
Did you find this story helpful?
Thank you for voting!

Chain brake broke

Dave from TALLMADGE, Ohio

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Removed the old parts and installed the new parts. Very easy job to complete.
The hardest part was putting the spring in place. To compress the spring , I used a medium sized flat screw driver and placed it in the end of the spring so it screw driver went part way in the spring and the wider part was able to push on the spring and w ith my other hand, hold down the rest of the spring and components and pop the spring in place.
Did you find this story helpful?
Thank you for voting!

Brake on husqvarna broke

Fred from Palm Bay, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
503890802
Removed old brake replaced knee joint and put spring back in knee joint and buttoned everything up then put brake back into install position .
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9282891
Manufacturer Part Number: 503890802
Brand Model Number Description
Husqvarna 132R Brush Cutter - 132 R (19904400001-19920100000)
Husqvarna 135 Chainsaw - From Chain Saw
Husqvarna 135E Chainsaw - From Chain Saw
Husqvarna 135ETRIOBRAKE Chainsaw - Chain Saw
Husqvarna 140 Chainsaw - From Chain Saw
Husqvarna 140E Chainsaw - From Chain Saw
Husqvarna 140ETRIOBRAKE Chainsaw - Chain Saw
Husqvarna 210C Lawn Mower - Automower 210c (2009-02)
Jonsered 2141 Chainsaw - Chain Saw
Jonsered 2145 Chainsaw - Chain Saw
Jonsered 2149 Chainsaw - Chain Saw
Jonsered 2150 Chainsaw - Chain Saw
Jonsered 2159 Chainsaw - Chain Saw
Jonsered 2159EPA Chainsaw - Chain Saw
Husqvarna 340 Chainsaw - Chainsaw
Husqvarna 340E Chainsaw - Chainsaw
Husqvarna 340EPA Chainsaw - Chainsaw
Husqvarna 345 Chainsaw - Chainsaw
Husqvarna 345E Chainsaw - Chainsaw
Husqvarna 345EPA Chainsaw - Chainsaw
Husqvarna 345ETRIOBRAKE Chainsaw - Chain Saw
Husqvarna 346 Chainsaw - Chainsaw
Husqvarna 346XP Chainsaw - Chainsaw
Husqvarna 346XPEPA Chainsaw - Husqvarna Chainsaw Model 346XPEPA Parts
Husqvarna 346XPTRIOBRAKE Chainsaw - Husqvarna Chainsaw Model 346XPTRIOBRAKE/2008-09 (346XPTRIOBRAKE/200809, 346XPTRIOBRAKE/2008 09) Parts
Husqvarna 350 Chainsaw - Chainsaw
Husqvarna 350EPA Chainsaw - Chainsaw
Husqvarna 351 Chainsaw - Chainsaw
Husqvarna 351EPA Chainsaw - Chainsaw
Husqvarna 353 Chainsaw - Chainsaw