This is a genuine Husqvarna part that is OEM sourced to ensure a high level of quality. This item is intended to be used with chainsaws. The guide bushing is used to secure the cover to the chain brake housing assembly. This item is sold as an individual replacement part.
The rubber guide bushing on my Husqvarna 440 chain saw had torn. Unrelated to this, the small plastic wear protector had done its job by preventing damage to the larger plastic piece to which it was attached. The chain had cut into the protector. The repairs were done with a screwdriver to remove the cover and replace the parts. Just be s
... Read moreure to make sure the chain brake is disengaged before attempting to remove the cover. I neglected to do this and had to pry off the cover. This action may have caused the damage to the guide bushing. It also required disengaging the brake before the cover could be reinstalled. To do this, I had to modify the socket wrench that came with the saw in order to reset the brake. Otherwise, this was a very easy repair.
1)Remove two 1/2\" nuts that hold cover on bar on to the engine
2) Remove chain and Bar
3) Clean, check for damage
4) replace cover and use screw driver to tighten cover screws
5) replace bushing on top of cover replace with new screw and tighten securely
1) Remove the chain cover (9/16 socket/wrench)
2) Remove the 2 screws holding the bushing in place (phillips screwdriver)
3) Replace the bushing (pull old one off and push new one on)
4) Reassemble.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_3.gif "Part Location Diagram of 503855201 Husqvarna Guide Bushing")
_WW_3.gif "Part Location Diagram of 503855201 Husqvarna Guide Bushing")
