Part Location Diagram of V103000120 Echo Intake Gasket
See part H-23 in the diagram
( Grid squares measure 1x1 inch )

Intake Gasket V103000120

Manufactured by:
Echo
ERP Number:
ERP9241550
Part Number:
V103000120
Original Equipment Manufacturer ?
  Works with your model  CS-341!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(4 rated repairs) ?
  Works with your model   CS-341!

Product Description

?

This is an authentic Echo replacement part manufactured for use with chainsaws. The intake gasket forms a seal between the insulator kit and the cylinder. It is recommended to replace gaskets when servicing the carburetor or cylinder to ensure a proper seal. The intake gasket is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Chainsaw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Would not stay running and would hesitate and die out everytime u gave it throttle

Keoni from Holualoa, Hawaii

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
12300139136, V103000120
Removed air cleaner
Then removed throttle linkage
Then removed prime ball fuel line
Then removed fuel line
Then removed the 2 nuts that hold carberator in place
Then removed carberator
Then removed caberator intake gasket
Then just reverse the process above.
Very easy if u are even if your a first timer
Did you find this story helpful?
Thank you for voting!

Echo CS-305 stopped running after air filter came off

Kevin from Bessemer, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
I was cutting wood and noticed the engine starting to run bad. I then noticed the air filter and cover had fell off. Wood debris got sucked into the carb intake. My first immediate purchase was a new echo carb which did not fix the issue. After research, I found that there was a reed valve that the carb mounted to that was stuck open caus ing no fuel or compression. 2 strokes are way different than a 4 stroke engine. After replacing the parts with the original carb, it fired right up and idled perfectly. So easy to replace. 4 screws, fuel line connectors and throttle linkage was only thing that had to be touched.
I did replace the muffler gasket which was 2 bolts. I did this to clean the flame arresting screen. Very easy too.
Did you find this story helpful?
Thank you for voting!

Carburetor gasket leaked and gasket needed to be replaced.

Robert from Geneva, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
Pulled off carb and replaced the gaskets.
Did you find this story helpful?
Thank you for voting!

Cracked insulator

Robert from Galloway, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Removed carburetor, throttle cable, fuel lines, choke,and cracked insulator. Then installed new seal, intake gasket,and insulator along with carburetor, choke, throttle cable,and air filter.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9241550
Manufacturer Part Number: V103000120
Brand Model Number Description
Echo CS-300 Chainsaw - Chainsaw
Echo CS-3000 Chainsaw - Chainsaw
Echo CS-301 Chainsaw - Chainsaw
Echo CS-303T Chainsaw - 30.1cc Top Handle Chain Saw
Echo CS-305 Chainsaw - Chainsaw
Echo CS-306 Chainsaw - C07511001001 - C07511999999 Chainsaw
Echo CS-340 Chainsaw - Chainsaw
Echo CS-3400 Chainsaw - Chainsaw
Echo CS-341 Chainsaw - Chainsaw