Part Location Diagram of 14551013931 Echo Gasket-muffler
See part C-88 in the diagram
( Grid squares measure 1x1 inch )

Gasket-muffler 14551013931

Manufactured by:
Echo
ERP Number:
ERP8866895
Part Number:
14551013931
Original Equipment Manufacturer ?
  Works with your model  CS-341!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   CS-341!

Product Description

?

This is an original Echo replacement part manufactured for use with chainsaws. The gasket forms a seal between the muffler and the small block. It is recommended to replace gaskets when servicing small engines to ensure a good seal when the parts are reassembled. The gasket is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Chainsaw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Echo CS-305 stopped running after air filter came off

Kevin from Bessemer, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
I was cutting wood and noticed the engine starting to run bad. I then noticed the air filter and cover had fell off. Wood debris got sucked into the carb intake. My first immediate purchase was a new echo carb which did not fix the issue. After research, I found that there was a reed valve that the carb mounted to that was stuck open caus ing no fuel or compression. 2 strokes are way different than a 4 stroke engine. After replacing the parts with the original carb, it fired right up and idled perfectly. So easy to replace. 4 screws, fuel line connectors and throttle linkage was only thing that had to be touched.
I did replace the muffler gasket which was 2 bolts. I did this to clean the flame arresting screen. Very easy too.
Did you find this story helpful?
Thank you for voting!

Gasket blew

Joe from Sellersville, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
14551013931
Remove side cover, remove both muffler bolts install gasket and reverse
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8866895
Manufacturer Part Number: 14551013931
Brand Model Number Description
Echo CS-280E Chainsaw - Chainsaw
Echo CS-280EP Chainsaw - Chainsaw
Echo CS-290EVL Chainsaw - Chainsaw
Echo CS-290EVLP Chainsaw - Chainsaw
Echo CS-300 Chainsaw - Chainsaw
Echo CS-3000 Chainsaw - Chainsaw
Echo CS-300EVL Chainsaw - Chainsaw
Echo CS-301 Chainsaw - Chainsaw
Echo CS-303T Chainsaw - 30.1cc Top Handle Chain Saw
Echo CS-305 Chainsaw - Chainsaw
Echo CS-306 Chainsaw - C07511001001 - C07511999999 Chainsaw
Echo CS-340 Chainsaw - Chainsaw
Echo CS-3400 Chainsaw - Chainsaw
Echo CS-341 Chainsaw - Chainsaw
Echo CS-345 Chainsaw - Chainsaw
Echo CS-3450 Chainsaw - Chainsaw
Echo CS-346 Chainsaw - Chainsaw
Echo CS-350TES Chainsaw - Chainsaw