This is an OEM part sourced directly from the manufacturer. The field case is commonly found in DeWALT grinders. This part is made of high-quality plastic, and is used to house the field assembly. You may require a screwdriver when replacing this item. The field case is available as an individual replacement part.
Troubleshooting
This part works with the following brands:
DeWALT
This part works with the following products:
Angle Grinder
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
When the brushes failed, the arms that hold them against the armature were damaged. They were held in with #4 star drive screws (TINY!!) which I initially thought were Allen screws, they were that hard to see (and very difficult to approach, being tucked in behind the motor fan). I broke the arm mount in disassembly but with a certain am
... Read moreount of force and the replacement case, I\'m back in business. Should have removed the fan so I could see the mount screws with a magnifier (which is what I used) and would have saved the damaged mount/case and made a MUCH simpler repair.
Replacing the case is very straight forward, remove the four screws that hold gear case, remove all screws that hold halves of rear case assembly, remove armature assembly and field after disconnecting leads, remove the brush holders and brushes after disconnecting them, remove brush terminals and reinstall on new case, install the little
... Read more flat coil springs on new case, this is the only part that was a little difficult for me since they are small and can only go in one way since the sit in case that secures them is closed on one side, then it is a simple matter to reverse disassembly procedure, grinder now looks as new!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
