eReplacementParts.com
866-322-9842
Toro Parts
Repair Parts Home  Toro Parts  Toro Snowblower Washers

Toro Snowblower Washers

Curved Washer
Part Number: 107-3844
In Stock, 25+ available
This is a genuine OEM sourced replacement part designed for use with Toro snow blowers/throwers. This steel washer helps to distribute the pressure evenly and allowing parts to be secured safely. It is helps to secure the upper and lower handles together. This part is made out of metal and it is sold individually.
Washer-Flat
Part Number: 3256-24
In Stock, 25+ available
This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.
Washer
Part Number: 40-1940
In Stock, 25+ available
This item is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal washer is used to provide spacing between the wheel and the pivot arm assembly. This item is available as an individual replacement part.
Flange-Cup, Bearing
Part Number: 26-6120
In Stock, 7 available
Washer-Flat
Part Number: 3256-3
In Stock, 20 available
This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.
Retainer-Push On
Part Number: 3290-320
In Stock, 25+ available
This is an original Toro replacement part manufactured for use with snowthrowers. The special push on retainer fastens the handle grip to the chute crank rod. This push on retainer is sold individually, please see model diagram for additional parts.
Washer-Flat
Part Number: 3256-14
In Stock, 24 available
An authentic manufacturer-sourced component which is specially produced for use with Toro snowblowers. This replacement flat washer has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct location and use of this hardware. It is a high-quality item which is made of durable metal and it is sold individually.
Washer-Flat
Part Number: 3256-28
In Stock, 14 available
This item is priced individually. The flat washer goes next to the hub cap and is made of metal. During the installation process, a wrench might be needed to replace this part. It will need to be replaced if it bends or breaks. This is a genuine Toro part sourced directly from the manufacturer for use in lawn mowers and lawn tractors.
Washer-Thrust
Part Number: 252-80
In Stock, 3 available
This is an authentic Toro replacement part manufactured for use with snowthrowers. The washer is used to prevent wear on the impeller pulley and provides space between the bearing flange. The thrust washer is sold individually.
Washer
Part Number: 52-2861
In Stock, 4 available
The washer attaches to the skid. It is available as an individual replacement part. This item is an OEM from Toro for use in snowblowers. A wrench might be needed during the installation process. It is made of metal and will require replacing if it breaks.
Washer-Flat
Part Number: 3256-23
In Stock, 2 available
This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your model's part diagram to confirm the washer's compatibility and usage. The flat washer is priced individually.
Washer-Flat
Part Number: 3256-81
In Stock, 20 available
This is an authentic manufacturer-sourced replacement part which is commonly used on Toro snowthrowers. Its purpose is to help distribute the pressure evenly and provides a tight seal for the connected pieces, please make sure to check appropriate diagrams of your model for correct location and use of this hardware. Note this durable metal washer is sold individually.
Washer-Flat
Part Number: 3256-22
In Stock, 3 available
This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal washer is commonly used to disperse pressure put on the auger housing by the nut that fastens the chute retainer across a wider surface area. This bolt is sold individually.
Washer-Pivot
Part Number: 5-4460
In Stock, 1 available
This is an authentic Toro replacement part, sourced from the original manufacturer for use with walk-behind lawnmowers. This special pivot washer is used to reduce friction between the spring arm that is used adjust the mower's height and the deck. This pivot washer is available as an individual replacement part.
Washer-Belleville
Part Number: 3290-456
In Stock, 8 available
The belleville washer goes next to the lock nut. It is made of metal and is sold individually. This is a genuine replacement part sourced from the original manufacturer for use with snowthrowers made by Toro and Lawn Boy. A screwdriver may be helpful when replacing this part. It may become broken and will need to be replaced.
Washer-Flat
Part Number: 3256-1
In Stock, 24 available
It is an authentic manufacturer-sourced component which is specially designed for use with Toro snowblowers. This replacement flat washer has multiple applications, please make sure to check the appropriate diagrams of your model for the correct location and use of this hardware. It is a high-quality part is made of durable metal and is sold individually.
Washer-Flat
Part Number: 3256-70
In Stock, 19 available
This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal washer is commonly used to disperse pressure put on a part assembly across a wider surface area. This flat washer is available as an individual replacement part, please see model diagram for associative parts.
Washer-Thrust
Part Number: 3-6498
In Stock, 6 available
The thrust washer is made of metal and goes next to the spring washer. This is a genuine replacement part sourced from the original manufacturer for use with lawn tractors made by Toro and Lawn Boy. This item is available as an individual replacement. During the installation process, a screwdriver might be needed to replace this part. It will need to be replaced if it breaks.
Washer-Flat
Part Number: 3256-26
In Stock, 16 available
This is an authentic Toro replacement part. The flat washer is commonly found in a variety of Toro yard machines such as lawn mowers and snow throwers. The flat washer is generally used to provide space and protection between a nut or bolt head and a housing. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a wrench, screwdriver, or pliers to replace this item. This part is sold individually.
Washer-Thrust
Part Number: 252-78
In Stock, 3 available
This is a genuine Toro replacement part. The thrust washer is designed by the manufacturer for use in snow throwers. This part is made of metal, and is generally used in securing the impeller shaft. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver when replacing this item. This part is sold individually.
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy