Toro Snow Blower Hardware

Genuine Manufacturer Approved replacement part designed for use with some Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. Bolt is 3/8-16 X 3-5/8. It is commonly used to keep the wheel in place. Wrench needed for installation.

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which is sold individually. It includes a metal washer. Please note you would need a wrench to replace this blade bolt.

This is an authentic OEM self-tapping bolt used on Toro snow throwers/blowers. It is designed to secure the bushing/gear case assembly together. By using a wrench and a self tapping bolt, precisely fitted threads are created in the opening of the case. This allows for the two part to be secured tightly together. Please note this bolt is sold individually.

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.

This is a genuine OEM sourced lock nut designed for use with Toro snowblowers. It is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. It is made out of metal and it is sold individually. You would need a wrench to tighten/loosen this nut.

This is a genuine OEM sourced replacement part designed for use with Toro snow blowers/throwers. This steel washer helps to distribute the pressure evenly and allowing parts to be secured safely. It is helps to secure the upper and lower handles together. This part is made out of metal and it is sold individually.

This screw is an OEM part sourced directly from the manufacturer and is used in Toro snowthrowers. It requires a wrench and connects the ring-chute to the chute-discharge. The screw is made of metal and is sold as an individual part. Screws will need to be replaced when they become stripped.

Genuine OEM sourced part used on variety of Toro Lawn and Garden Equipment. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

This item is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal washer is used to provide spacing between the wheel and the pivot arm assembly. This item is available as an individual replacement part.

This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable me...

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this high-quality flange nut is made of durable metal and is sold in...

This is an authentic replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers from Toro and Lawn Boy. The shoulder screw is commonly used to secure the side fenders to the mower's frame assembly. This bolt is sold as an individual replacement part.

This is a genuine OEM sourced lock nut designed for use with Toro snow blowers/throwers. It is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. It is made out of metal and it is sold individually. You would need a wrench to tighten/loosen this nut.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal hex head screw is used with a variety of different models of snowthrowers. This screw can have different applications depending on the model of snowthrower. The screw is sold as an individual replacement part, please see model diagram for part location and usage.

It is made of metal and is sold individually. The screw connects to the idler pulley. A socket set might be needed during the installation process. Over time this part may become stripped and will need to be replaced. This part is an OEM from Toro and Lawn Boy for use in snowthrowers, tillers, blower-vacuums, and lawn tractors.

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

This is a Genuine OEM replacement Paddle Bolt used on Toro Snowthrowers. It is made out of Metal and it is Sold Individually. It helps to secure the Paddle to the Rotor using a Lock Nut. Requires a Torx Screwdriver.