OEM Crosley Dryer Parts & Accessories

Rear Drum Support Roller Kit

$17.80

Manufacturer Part Number:: 349241T

This kit includes two rear drum support rollers, four tri-rings, and one palnut. It is recommended that you replace both rollers at once.

Maintenance Kit

$34.97

Manufacturer Part Number:: 4392065

The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt attaches to the drum, idler pulley, and motor pulley. If your dryer is damaged, it may be making loud, squeaking, and/or squealing noises while the drum is turning. This is from normal wear and tear. The...

Idler Pulley with Bracket

$26.73

Manufacturer Part Number:: W10837240

Heating Element - 240V 5400W

$57.07

Manufacturer Part Number:: 279838

This heating element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current, causing the wire to heat up. The heat produced is used to dry the clothes in your dryer.

Dryer Thermal Fuse

$16.75

Manufacturer Part Number:: WP3392519

Dryer Door Switch

★★★★★

(2)

$26.73

Manufacturer Part Number:: WP3406107

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

Thermal Cut-Off Kit

★★★★★

(1)

$46.30

Manufacturer Part Number:: 279816

Dryer Drum Support Roller

$18.85

Manufacturer Part Number:: WPW10314173

This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. This part is sold separately. Most dryers require two drum rollers. It is recommended to check and replace both drum support rollers at the same time to ensure proper drum rotation and because they often wear at the same ra...

Dryer Cycling Thermostat

$26.20

Manufacturer Part Number:: WP3387134

Cycling thermostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermostat has a limit of 155 degrees Fahrenheit and a differential of 25 degrees. Meaning that the heating element will cut out at 155 degrees and cycle back on once the internal temperature drops by 25 degrees.