Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
Install
videos!
346995-1-M-Whirlpool-341241 -Multi Rib Belt - 92-1/4"
Part Location Diagram of 341241 Whirlpool Multi Rib Belt - 92-1/4"
See part 26 in the diagram
Replacing your Kenmore Dryer Multi Rib Belt - 92-1/4"
346995-1-S-Whirlpool-341241 -Multi Rib Belt - 92-1/4" 360 view
( Grid squares measure 1x1 inch )
346995-1-S-Whirlpool-341241 -Multi Rib Belt - 92-1/4" 346995-2-S-Whirlpool-341241 -Multi Rib Belt - 92-1/4" 346995-1-S-Whirlpool-341241 -Multi Rib Belt - 92-1/4" 360 view
Part Location Diagram of 341241 Whirlpool Multi Rib Belt - 92-1/4" Replacing your Kenmore Dryer Multi Rib Belt - 92-1/4"

Multi Rib Belt - 92-1/4" 341241

Manufactured by:
Whirlpool
ERP Number:
ERP346995
Part Number:
341241
Original Equipment Manufacturer ?
$14.63
★★★★★
★★★★★
1 Review
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(16 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Frequently Purchased Together Troubleshooting Repair Videos Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This dryer drum belt has four ridges, three grooves and is 1/4" wide.

Frequently Purchased Together

?

Troubleshooting

This part fixes the following symptoms:
  • Drum Not Spinning
  • Noisy
  • Heat stays on after drum has stopped
  • Won’t Start
  • Not Heating
  • Too hot
  • Touchpad does not respond
This part works with the following brands:
  • Kenmore
  • Whirlpool
  • KitchenAid
  • Norge
  • Roper
  • Maytag
  • Magic Chef
  • Crosley
  • Admiral
  • Estate
  • Amana
  • Inglis
  • Jenn-Air
  • Hoover
  • Kenmore
This part works with the following products:
  • Dryer
  • Washer Dryer Combo
Part# 341241 replaces these:
  • AP2946843
  • 529597
  • 341241
  • 14210003
  • 2008
  • 26000341241
  • 26000349533
  • 31001026
  • 31531589
  • 3389628
  • 3392665
  • 3394651
  • 3399844
  • 341241
  • 341241VP
  • 345473
  • 349533
  • 53-0186
  • 53-1080
  • 53-1086
  • 53-1528
  • 53-1589
  • 53-2671
  • 53-2910
  • 660996
  • 660997
  • 661561
  • 693306
  • 694088
  • 694416
  • 694868
  • 695055
  • 697388
  • 8066065
  • 8206
  • 8210
  • 99906951
  • 99989673
  • 99989674
  • AP32
  • FSP341241
  • P46-037
  • P46-149
  • W10127457
  • W10131364

Videos For installing this part.

?
Replacing your Multi Rib Belt - 92-1/4"
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
perfect fit!
dryer works perfect now . Thank You!
Guest - January 26, 2022
Verified Purchase

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cannot find this model number on the list- needs a belt! How long is the belt for this dryer?
Frank For model number WED4815EW1 - August 8, 2022

Hello Frank, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 341241 for the Drive Belt. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
August 8, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(16 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Drive belt broke

Eldred from Gloucester, Virginia

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
341241
Remove front and replace belt
Did you find this story helpful?
Thank you for voting!

Dryer drum belt was cut

Zamen from MIDVALE, Utah

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
341241
Took the front covers apart and got to the drum and belt and replaced it.
Did you find this story helpful?
Thank you for voting!

Drive belt worn out and broken

Michael from Zeeland, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
341241
Lifted the top of the drier tilted back then removed front panel, removed drum, inspected idler pulley and it was fine. Took extra time to get all the duct work and drier lint free.Then placed belt around the drum re installed drum routed belt through idler pulley on to the motor pulley re installed front panel and top.
Did you find this story helpful?
Thank you for voting!

Dryer drive belt broke. Dryer ran, but drum wouldn\'t turn

Dwight from Lees Summit, Missouri

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
341241
1. Unplugged dryer.
2. Removed the lint filter and removed the two Phillips screws inside lint filter lid.
3. Using a paint scraper, insert under the top about 2\" from the right corner, push the scraper in between the top and the front panel to release the snap connector, then pry release the top right hand side. Repeat f or left hand side.
4. With both front corners released, lift top over all the way.
5. Using a 5/16 nut driver, remove the two screws on the top of the left and right inside panels.
6. Disconnect the connector for the door switch.
7. Lift front panel and remove front from the rest of the dryer. The bottom is held in place by a clip which will release when the front is lifted.
8. Slip belt over drum, using the wear mark on drum to establish is original position.
9. Prop up the drum to give clearance when completing install of the belt. Having a helping hand is recommended if available.
10. Reach under the drum and string the belt through the belt tensioner and over the pulley on the end of the motor shaft.
11. With belt in place and strung over the belt tensioner and over the pulley, support the drub while fitting the front in place.
12. With front in place and secured, rotate drum to ensure the seal to the rear is in place.
13. Reassemble the remaining dryer components in reverse order.
Plug in dryer and test.
Read less
Did you find this story helpful?
Thank you for voting!

Noisy when running

robert from Lancaster, New York

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
341241
I removed the dryer drum. Cleaned out the cabinet and installed the new drive belt. The video on the repair was very helpful
Did you find this story helpful?
Thank you for voting!

Belt broke

Felix from Lares, Puerto Rico

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
341241
Disconnected power cable.
Took apart dryer cabinet. Cleaned all parts with vaccum cleaner.
Lubricated rollers, replaced belt and roller clips.
Reassembled unit.
It is very important to inspect all components to prevent other repairs.
Did you find this story helpful?
Thank you for voting!

Dryer belt broke

Richard from Blue Bell, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP691366, 341241
Removed top of dryer
Removed front of dryer
Lifted out drum and replaced belt, rollers and idler pully
Hardest part was putting drum back in place but it wasn\'t the bad
Did you find this story helpful?
Thank you for voting!

Belt broke

Joseph from Lena, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP691366, 341241
Remove 2 screws at lent trap door
Lift top from front
Remove two screws inside front panel
Remove front panel
Remove drum, idler wheels and tensioner
Replace idler wheels and tensioner, belt drum and front cover with front cover screws
Move belt over motor pully and tensioner
Test drum rotation
Lower top install two screws at lent trap door
Read less
Did you find this story helpful?
Thank you for voting!

Tumbler would not rotate

David from Olive Hill, Kentucky

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
341241
Removed 2 screws in front cover, checked bearings in pulleys, slipped belt over drum and reinstalled front cover. Also cleaned all lint out of vent in front cover while off.
Did you find this story helpful?
Thank you for voting!

Drum wouldn\'t turn when loaded with wet laundry

James from Alva, Oklahoma

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
341241
Took the drum out removed drum rollers scotch brighted shafts with 3000 grit until shiny . Sprayed a dry lubricant on shafts and replaced rollers . The idler pulley was good and some plastic rubbing blocks cleaned up as well. Next I dropped new belt over drum and reattached it to idler pulley. Reassembled everything and now I can dry heav y blankets which it wouldn\'t do before.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP346995
Manufacturer Part Number: 341241
Brand Model Number Description
Kenmore 10686294140 Dryer
Kenmore 10686294340 Dryer
Kenmore 10686294540 Dryer
Kenmore 10686294740 Dryer
Kenmore 10686294840 Dryer
Kenmore 11060012000 Dryer
Kenmore 11060012001 Dryer
Kenmore 11060012002 Dryer
Kenmore 11060022010 Dryer
Kenmore 1106012510 Dryer - ELECTRIC DRYER
Kenmore 11060172000 Dryer
Kenmore 11060172001 Dryer
Kenmore 11060172002 Dryer
Kenmore 11060202990 Dryer
Kenmore 11060212990 Dryer
Kenmore 11060222510 Dryer - DRYER
Kenmore 11060222511 Dryer - ELECTRIC DRYER
Kenmore 11060232000 Dryer
Kenmore 11060232001 Dryer
Kenmore 11060232002 Dryer
Kenmore 11060522900 Dryer
Kenmore 11060602990 Dryer
Kenmore 11060612990 Dryer
Kenmore 1106062110 Dryer
Kenmore 11060622990 Dryer
Kenmore 11060702990 Dryer
Kenmore 11060712990 Dryer
Kenmore 1106072010 Dryer - ELECTRIC DRYER
Kenmore 1106072011 Dryer - ELECTRIC DRYER
Kenmore 11060722990 Dryer
Multi Rib Belt - 92-1/4"
$ 14.63
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖