eReplacementParts.com
866-322-9842
Makita Parts
Repair Parts Home  Makita Parts  Makita Circular Saw Springs

Makita Circular Saw Springs

Tension Spring
Part Number: 231806-7
In Stock, 25+ available
Genuine Makita replacement part, this item is sold individually.
The purpose of the 231806-7 Tension Spring is to raise and lower the telescoping lower guard.
When you make a cut the Lower Guard will raise up inside of the upper guard, as you get to the end of your cut the Spring will cause the lower guard to return to it original position.
The spring is attached to the Lower Guard and also to the upper Guard housing.
Tension Spring 4
Part Number: 231839-2
In Stock, 25+ available
Genuine Makita replacement part, this item is sold individually.
The purpose of the 231839-2 Tension Spring is to return the Lower guard back to its original position after use.
To attach the spring, one end is installed on the Lower Guard and the other end is installed in the Blade Case.
Compression Spring 2
Part Number: 233025-1
In Stock, 25+ available
This is a Genuine OEM replacement part used on some Makita Power Tools. This is a Metal Spring and it is Sold Individually. Over time springs may loose its tension and may not function as intended. If this part is lost or damaged it must be replaced.
Compression Spring 3
Part Number: 231457-6
In Stock, 25+ available
This compression spring is a genuine Makita replacement part. It is sold individually.
Tension Spring 3
Part Number: 231821-1
In Stock, 25+ available
This item has been sourced from the original manufacturer to be used with circular saws from Makita. The metal spring is used to provide tension between the lower guard and the blade case. This item allows the guard to pivot through the cut and spring back over the blade after the cut. This item is priced as a single item.
Compression Spring 7
Part Number: 233267-7
In Stock, 12 available
The compression spring is made of metal and fits between the stopper and the adjuster. The part is sold individually and is an original Makita part for use in nailers and saws. This is a small part and will need to be replaced if it becomes lost or broken. A screwdriver may be needed when doing the replacement for this part.
Rewind Spring
Part Number: 181-163-050
In Stock, 12 available
This is an authentic Makita replacement part manufactured for use with power cutter saws. This metal spring is used within the recoil starter assembly. It is used to provide tension to retract the starter rope after it has been pulled to start the saw. The rewind spring goes through wear every time the saw is started and can become bent if it disconnects from the starter pulley. The rewind spring is available as an individual part.
Compression Spring 7
Part Number: 231240-1
In Stock, 17 available
The compression spring connects to the pin. It is made of metal and is sold individually. This is an OEM part sourced directly from the manufacturer and used in Makita saws. A set of pliers might be necessary during the installation of this item. This part will need to be replaced if it breaks or bends.
Compression Spring 11
Part Number: 231131-6
In Stock, 6 available
This is an authentic replacement part manufactured for use with Makita miter saws and circular saws. The compression spring has multiple uses and commonly used to provide compression for the miter adjustment knob on miter saws. This compression spring is sold as an individual replacement part, please see model diagram for part location and usage.
Garter Spring
Part Number: 654020-2
In Stock, 25+ available
Included in part number 596141-3
Tension Spring 4
Part Number: 231818-0
In Stock, 9 available
This is an authentic Makita replacement part manufactured for use with circular saws. This tension spring is used to keep the lower guard in the forward position before and after making a cut. This tension spring is sold individually.
Tension Spring 4
Part Number: 231773-6
In Stock, 11 available
This is an authentic Makita replacement part manufactured for use with circular saws. The tension spring is used to allow the lower cover to be pulled back after it pivots when the blade passes through the material. This is tension spring is sold as an individual replacement part.
Compression Spring 9
Part Number: 231297-2
In Stock, 4 available
The compression spring attaches to the shaft lock. This is an authentic Makita replacement part that is sourced from the original manufacturer for use with saws. This item is available as an individual replacement and is made of metal. A set of pliers, a screwdriver, and a wrench set may be necessary during the installation of this part. It will need to be replaced if it becomes broken or bent.
Compression Spring 6
Part Number: 231278-6
In Stock, 2 available
This is a genuine Makita replacement part. The compression spring is commonly found in Makita power tools such as screwdrivers and saws. This part is made of metal, and is generally used to provide tension between components. It may be found in various locations in the machine, depending on model. Please be aware that there may be different springs used in the machine. Refer to the parts diagram to be sure of ordering the correct part. This item is sold individually.
Compression Spring 4
Part Number: 233024-3
In Stock, 9 available
Ring Spring 12
Part Number: 231955-0
In Stock, 2 available
Spring Easy-Start
Part Number: 181-163-080
In Stock, 4 available
Tension Spring 4
Part Number: 231730-4
In Stock, 4 available
This star drag spring is a genuine part which is supplied by the original manufacturer for use with Makita circular saws. The spring applies tension on the connected safety cover allowing it to retract. Over time it can wear out, get damaged or lost eventually requiring a replacement. Make sure to refer to the appropriate diagrams for your model to ensure the correct repair procedure. This tension spring is made of high-quality metal and is sold individually.
Compression Spring 5
Part Number: 231372-4
In Stock, 6 available
This is an OEM part sourced directly from the manufacturer. The compression spring is found in Makita power tools such as plunge routers, chain saws, and circular saws. This part is made of metal, and is generally used to provide tension to components. It may be found in various locations in the machine, depending on model. Please be aware that there are different springs used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver or wrench when replacing this part. This item is sold individually.
Endbell Comp.
Part Number: 638502-2
In Stock, 3 available
This is a genuine Makita replacement part used in compatible saws. The endbell goes next to the yoke unit. A set of pliers may be needed during the replacement of this part. It is made out of plastic and metal and will need to be replaced if it breaks. This item is available as an individual replacement part.
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy