Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fit & worked as expected
The part arrived quickly & fit as expected.
Guest - September 11, 2019
Verified Purchase
★★★★★
★★★★★
High quality .
I received the parts on my polisher , installed them and worked great . Good original parts and great service , thanks .
Guest - September 27, 2019
Verified Purchase
★★★★★
★★★★★
Easy repait
Arrived quickly
Guest - October 23, 2019
Verified Purchase
★★★★★
★★★★★
Factory parts
Fit perfect, grinder working as new, thanks
Guest - October 14, 2020
Verified Purchase
★★★★★
★★★★★
GREAT PARTS
REALLY LIKE THESE FOLKS, BEEN THERE IN PERSON MANY TIMES, LETS HELP THEM STAY IN BUSINESS.
Guest - June 8, 2021
Verified Purchase
★★★★★
★★★★★
The part worked as designed perfect
The part worked as designed perfect thank you
Joseph - June 23, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair
Parts fix perfectly and easy to install saved over $70.00 to send out for repairs
Guest - October 15, 2021
Verified Purchase
★★★★★
★★★★★
new brushes mean my grinder can work a little longer
The parts were easy to install and it is much cheaper to fix a tool than buy a replacement....and since I am retired time isn't an issue and we have almost 10 grinders so one not working doesn't slow us down.
Guest - June 17, 2022
Verified Purchase
★★★★★
★★★★★
I'VE RECEIVED WHAT I SPECTED AND I AM VERY PLEASED THANKS
I AM VERY PLEASE WITH EREPLACEMENTPARTS
I USUALY GET THE PARTS THAT I NEED
JACOB - March 1, 2023
Verified Purchase
★★★★★
★★★★★
Great service
Got the parts they were right recieved them fast impact up and running
Jeff - March 16, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the brush caps with a screw driver, then remove the worn brushes. Insert the new brushes into the brush holders , then screw the brush caps back on.
Did you find this story helpful?
Thank you for voting!
Makita 7\" Sander/Polisher with bad on/off switch and worn brushes.
Remove the screws from the handle cover
Make a wiring diagram
Remove the switch from the handle
Remove the cord clamp
Disconnect the wires from the old switch
Connect the wires to the new switch, and screw the switch and cord clamp to the handle
Replace the handle cover
Remove the brush caps
... Read more/>Remove the old brushes
Install the new brushes
Replace the brush caps
1.Removed the brush caps
2.Removed the old brushes
3.Installed the new brushes
4.Screwed on the brush caps
5.Removed the dust bag
6.Installed the new one
Makita 9217SPC, variable speed sander polisher. this is a high mileage tool that is heavily depended on in my occupation as a professional boat builder. This tool functions primarily with an eight inch pad and very typically 36 grit for shaping in the rough prior to the application of fiber glass, and again after the application of glass.
... Read more I have had the tool for 12 years this was the eighth set of brushes I have installed. I cross threaded the brush cap while inspecting the brushes, which created the problem of finding an extra brush cap. Removal of the cross threaded button required the careful destruction of the same. I am thankful that e replacement parts had those brush caps available and in stock as I am extremely attached to that old sander and although I have the newer model that\'s 2 years old there are a few ergonomic differences and I prefer the older model..... Thanks again.
All you need to do is remove the brush cap and take out the old brushes and put in the new ones , then put the brush caps back on.
1. Remove screws on right side of handle.
2. Remove clamp (2 screws) holding cord. Note orientation for cord guard and power cord
3. Remove two screws connecting power cord
4. Place cord guard over new power cord, crimp on ring terminals, reinstall in reverse order.
Replace carbon brushes
1. Remove brus
... Read moreh retainer caps
2. Use small pic to ease out brush, note orientation, replace with new brush kit CB-124, replace retaining caps
3. Inspect overall condition of grinder, if all is good, plug in and test.
Read less
Did you find this story helpful?
Thank you for voting!
Cord was cut, older sander, so replaced brushes at the same time
Removed the six screws holding half of the body
Removed the switch
Removed wires from switch
Note: new cord does not have eyelets on end, had to add
Reattached wires to switch
Reattached body
Replaced brushes
Runs like new
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
