OEM Craftsman Edger Parts & Accessories

Edger Blade – Part Number: 781-0080-0637

$11.92

Manufacturer Part Number:: 781-0080-0637

This edger blade is an OEM part direct from Craftsman for edgers. This part connects to the drive shaft to edge and cut grass. It is recommended to review your models diagram to verify the parts compatibility. You will need a wrench to replace this part. This edger blade is made of metal and sold individually.

Edger Blade

★★★★★

(19)

$21.60

Manufacturer Part Number:: 243801-00

This is a genuine replacement Blade for the Black and Decker Edgers shown below. This is a new style Blade for these edgers. If this is the first time you have used this new Blade, you will need to order two of the part number 243797-00 Washers for this new Blade. Or you can order part number EB-007AL 7 1/2" Blade (Includes 2 Washers).

Cultivator Air Filter

★★★★★

(4)

$5.95

Manufacturer Part Number:: 753-05996

This filter is an authentic OEM replacement part sourced directly from the manufacturer. It is commonly used in MTD and Troy-Bilt tillers and cultivators. This part filters the air entering the carburetor. Without a proper air filter, the machine may stop running. It should be replaced if it is worn or clogged beyond cleaning. It is sold individually, and a screwdriver is needed to replace it.

Edger Blade

★★★★★

(16)

$6.85

Manufacturer Part Number:: 530095086

This is a genuine Weed Eater replacement part, it is sold individually. This blade is used on all of the edgers shown below. Its dimensions are 8-3/8 inches long and 1-1/2 inches wide. This blade when in use will hit concrete, rocks and other debris, which will shorten the blade. It is advised to keep one blade on hand.

Fuel Line

★★★★★

(21)

$14.92

Manufacturer Part Number:: 530069599

This is a genuine OEM replacement part designed for use with gas trimmers/blowers. The fuel line is what delivers the fuel from the fuel tank into the carburetor. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return line. Over time these lines will become brittle and may...

Snow Blower Star Knob

★★★★★

(3)

$10.63

Manufacturer Part Number:: 720-04072A

Fuel Tank Assembly w/Fuel Lines (includes 26)

★★★★★

(23)

$41.80

Manufacturer Part Number:: 753-06240

This is an authentic fuel tank assembly for a trimmer. This assembly includes the fuel tank, fuel lines, and a fuel cap. Please note that the tabs used to secure the tank are sold separately. Replacing this fuel tank assembly will solve a leaking fuel tank, deteriorated fuel lines, or a broken fuel cap. If your fuel tank is leaking, this assembly should solve the issue. Never run your equipment wi...

Fuel Tank Asm

★★★★★

(10)

$33.60

Manufacturer Part Number:: 753-06797

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman trimmers. The fuel tank houses the fuel used to power the machine. This part is made of hard plastic and is sold individually. The fuel cap and fuel lines are included in the assembly. For installation you will need a screw driver to remove and shrouds and covers.

SA SPOOL AND LINE DUAL

★★★★★

(16)

$17.82

Manufacturer Part Number:: 90567225N

This is a genuine Black and Decker replacement part,it is sold individually. This is the part of the String Trimmer that contains the cutting line. This part includes the spool and cutting line for the models shown below. This is a dual line spool. The cutting line is .065 gauge. It is replaced by removing the spool cover and placing it inside the spool housing, then feed some line through the ...

Rod-adjust

★★★★★

(12)

$23.93

Manufacturer Part Number:: 747-04110A

This is a Manufacturer Approved replacement part designed for Trimmers/Edgers. This blade adjustment rod is made out of Metal and it is Sold Individually. Blade adjustment rod lets you adjust the position of the blade for bevel cutting. When replacing this Rod you will need Pliers, Socket set, Wrench Set.

Lawn Mower Ground Drive Belt

★★★★★

(44)

$31.80

Manufacturer Part Number:: 954-04032B

This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power from the engine to the pulley that drives the cutting blades. Over time, the belt may become brittle or cracked due to wear and exposure, requiring replacement to maintain optimal performance. Measurin...

Belt V 4l 32.60 Lg

★★★★★

(9)

$24.87

Manufacturer Part Number:: 32668MA

This is a genuine Murray replacement part that has been sourced from the original manufacturer to be used with walk-behind edgers. The belt links the motor's drive shaft and the blade's quill assembly. This item allows the blade and the drive shaft to rotate in unison. This belt is priced as a single item.

Craftsman Edger Parts

Top Craftsman Edger Models

Popular Craftsman Edger Parts

Craftsman Edger Models

Shop by Popular Craftsman Edger Part Types

Craftsman Edger Parts

Search By Model or Part Number

Top Craftsman Edger Models

Popular Craftsman Edger Parts

Craftsman Edger Models

Shop by Popular Craftsman Edger Part Types