Homelite Pressure Washer Parts
We sell only genuine OEM Homelite ® parts.
Top Homelite Pressure Washer Models
See All ModelsPopular Homelite Pressure Washer Parts
- Manufacturer Part Number:
- 308494075
This replacement spray wand is specially made for use with Ryobi pressure washers. It is supplied directly from original manufacturer and it is sold individually. This items connects to the pistol/gun and allows user to connect nozzles to change spray patterns. This is a commonly replaced part due to regular wear, damage or if it is lost. Replacing a wand is easy and does not require any tools.
- Manufacturer Part Number:
- 308451067
This is an original part from Ryobi. The wheel is constructed of high-quality plastic, and is compatible with several pressure washers. This component is fitted on the main frame assembly, allowing the operator to easily move the cleaning device when needed. A flat head screwdriver and a mallet may be helpful for the removal and replacement. The wheel is sold individually.
- Manufacturer Part Number:
- 308835006
(25 ft., 3000 psi)
This water hose is for pressure washers.
Water hose carries water from the pump to the spray wand.
Wear work gloves to protect your hands when installing this part.
- Manufacturer Part Number:
- 308862003
Genuine OEM replacement part, this item is sold individually. This is the part on the pressure washer that you connect the hose to. The hose then connects to the handle assembly and spray wand.
- Manufacturer Part Number:
- 308861003
This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. It is available as an individual replacement part, but also includes the metal bolt and the rubber o-ring.
- Manufacturer Part Number:
- 310870002
This item is sold individually and is made out of plastic, rubber, and metal. The pressure switch connects to the pump and helps to control the pressure inside the tank. A set of pliers and a screwdriver might be required during the replacement of this part. It will need to be replaced if it becomes broken or frayed. This is an original part for pressure washers made by Homelite and Ryobi.
- Manufacturer Part Number:
- 308494077
- Manufacturer Part Number:
- 308760087
This is a genuine manufacturer approved replacement part designed for use with pressure washers. It is the essential part of the unit allowing to direct and control the spray. This pistol assembly is made out of plastic and metal. It is sold individually. Please note the wand is sold separately.
- Manufacturer Part Number:
- 308835065
This is a genuine Ryobi replacement high pressure hose that is supplied directly from original equipment manufacturer. It is specially designed for use with pressure washers. This high pressure hose is made out of rubber/plastic material. It is 25 ft long and it is sold individually. This hose can be used on pumps that produce up to 1700 PSI.
- Manufacturer Part Number:
- 308698028
This genuine OEM quick connect nozzle is guaranteed to fit the Ryobi pressure washers listed below. This yellow chiseling nozzle has a standard fifteen (15) degree spray width. This water-only tip is recommended for heavy duty pressure washing duties, such as cleaning stubborn stains and grime from hard surfaces. It is one step less powerful than the red zero degree tip (the most powerful quick ch...
- Manufacturer Part Number:
- 561399003
It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.
- Manufacturer Part Number:
- 308452002
This is a genuine OEM replacement kit. This kit is threaded into the pump assembly. It is connected to the Chemical Siphon Tube that is placed in a container that contains the cleaner you are using. The O-Rings are placed on the Bronze nozzle, then the spring will go in first, then the steel ball, then thread in the nozzle.
Homelite Pressure Washer Models
Shop by Popular Homelite Pressure Washer Part Types
- Homelite Pressure Washer Brackets and Flanges
- Homelite Pressure Washer Caps and Lids
- Homelite Pressure Washer Engines
- Homelite Pressure Washer Filters
- Homelite Pressure Washer Handles
- Homelite Pressure Washer Hardware
- Homelite Pressure Washer Hoses and Tubes
- Homelite Pressure Washer Manuals and Literature
- Homelite Pressure Washer Pumps
- Homelite Pressure Washer Seals and Gaskets
- Homelite Pressure Washer Switches
- Homelite Pressure Washer Valves
- Homelite Pressure Washer Wheels and Rollers