OEM Milwaukee Hammer Drill Parts & Accessories

Cord Protector – Part Number: 44-76-0210

$5.95

Manufacturer Part Number:: 44-76-0210

This cord protector is a genuine Milwaukee replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

Switch

★★★★★

(25)

$26.07

Manufacturer Part Number:: 23-66-0177

This Trigger switch has 4 internal terminals. This authentic Milwaukee replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools. A switch handles all on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they tend to degrade and wear out ov...

Chuck Key

★★★★★

(8)

$14.75

Manufacturer Part Number:: 48-66-3280

Genuine Milwaukee replacement part, this item is sold individually. This Chuck Key tightens the jaws of the 1/2 inch capacity Chucks on all the Drill models shown below. For convenience a Chuck Key Holder part number 48-66-4040 can be ordered. It is attached to the power cord then the Chuck Key is attached to it.

Brush Card Assembly

★★★★★

(11)

$20.95

Manufacturer Part Number:: 22-22-2602

This OEM sourced replacement part is designed for Milwaukee drills/drivers. This assembly secures carbon brushes around the armature to provide stable contact. This assembly consists of: plastic holder ring, four (4) metal brush holders with springs and four (4) carbon brushes with lead wires attached. To replace this assembly you would need a screwdriver. • First remove screws holding the cov...

Collet

★★★★★

(10)

$8.68

Manufacturer Part Number:: 42-77-0400

This is a genuine Milwaukee Collet for using bits with 1/8-inch arbors. Due to prolonged, heavy use a collet may need to be replaced. Use Collet Nut Wrench Part Number: 45-96-0400 to remove the Collet Nut Part #: 44-40-0770.

Keyless Chuck Assembly

★★★★★

(11)

$59.38

Manufacturer Part Number:: 42-66-1006

This is a 1/2-inch OEM keyless chuck for hammer drills, allowing users to swiftly change drill bits and attachments without requiring a chuck key. Due to the mechanical stresses it undergoes, the jaws of the chuck can break or wear significantly, resulting in a loss of grip or excessive play. If you encounter difficulty tightening or loosening the chuck jaws on your drill or notice wobbling during...

Quik-Lok Power Cord Set

★★★★★

(15)

$56.45

Manufacturer Part Number:: 48-76-4008

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually. This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to...

C-ring

$5.95

Manufacturer Part Number:: 44-90-0014

This c-ring is supplied directly from the original equipment manufacturer. The metal ring is compatible with the Milwaukee 1" D-Handle Rotary Hammer. This protective part is fitted between the chuck sleeve and the ball plate. Although the c-ring is sold individually, two are needed for the hammer. A screwdriver is needed for the replacement.

7mm Ball

★★★★★

(3)

$5.95

Manufacturer Part Number:: 02-02-0275

This is a genuine Milwaukee part that has been sourced from the original manufacturer to ensure a high level of quality. The steel ball is used to reduce friction between the gear case assembly. This item is sold as an individual replacement part.

120v Carbon Brush

★★★★★

(4)

$5.95

Manufacturer Part Number:: 22-18-0032

This 120v carbon brush is an OEM direct from the Milwaukee manufacturer. Compatible with the 5262-21 (G43B) 1" SDS D-Handle Hammer, the brush is secured to the brush holder and armature. The purpose of brushes is to conduct current in an electric motor that powers the tool. This part is sold individually. A screwdriver is needed to make the proper removal and replacement.

Brush Service Kit

★★★★★

(1)

$12.68

Manufacturer Part Number:: 22-18-6025

This is a genuine brush set designed for use with Milwaukee rotary hammers. This assembly includes two (2) carbon brushes with lead wires attached. Please note brush holders are sold separately. Due to prolonged contact with an armature brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. To complete this repair you would need a s...

Dust Cap

★★★★★

(1)

$5.95

Manufacturer Part Number:: 42-52-5262

This is an authentic Milwaukee replacement part manufactured for use with rotary hammers. The special dust cap is used to prevent debris from entering the sleeve. This dust cap is available as an individual replacement part, please see model diagram for associative parts.

Milwaukee Hammer Drill Parts

Top Milwaukee Hammer Drill Models

Popular Milwaukee Hammer Drill Parts

Milwaukee Hammer Drill Models

Shop by Popular Milwaukee Hammer Drill Part Types

Milwaukee Hammer Drill Parts

Search By Model or Part Number

Top Milwaukee Hammer Drill Models

Popular Milwaukee Hammer Drill Parts

Milwaukee Hammer Drill Models

Shop by Popular Milwaukee Hammer Drill Part Types