866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Bosch Parts  Bosch Demolition Hammer Bearings

Bosch Demolition Hammer Bearings

Deep-Groove Ball Bearing
Part Number: 2600905032
In Stock, 23 available
This steel bearing is a genuine replacement part. This item is used in a variety of Bosch power tools. Ball bearings allow for reduced friction and therefore smooth rotation. Due to metal fatigue, ball bearings are to be replaced regularly. This part is sold individually.
Needle-Roller Bearing
Part Number: 1610910089
Ships in 5 - 11 business days
This is a genuine Bosch replacement part used in compatible hammers. The roller bearing needle fits next to the shaft sealing ring and helps to reduce the friction. It can wear out over time and will need to be replaced. When installing this part a screwdriver may be needed. This item is priced individually and is made of metal.
Deep-Groove Ball Bearing
Part Number: 2610909310
In Stock, 12 available
This is an original replacement part manufactured for use with Bosch rotary hammers. This bearing is used to allow movement of the armature while seated in the bearing end plate. The bearing as a series of steel balls inside that allows the bearing to rotate while the armature is spinning. Bearings can wear down over time and can cause a loud noise while the tool is on or even a wobble which can cause damage to the electric motor. Replacing a worn out bearing can promote performance, and prevent further damage. This bearing is sold as an individual replacement part.
Bearing End Plate
Part Number: 1615808083
In Stock, 3 available
This is a genuine OEM replacement part used with hammer devices. The Bosch bearing end plate is constructed of plastic, and is sold individually. This item is provides protection to the armature fan. A screwdriver is required for the proper installation.
Needle-Roller Assembly
Part Number: 1617000403
In Stock, 5 available
Deep-Groove Ball Bearing
Part Number: 1610900015
In Stock, 4 available
Ø12xØ37x12
Needle-Roller Bearing
Part Number: 1610910092
Ships in 5 - 11 business days
This authentic OEM sourced part is specially made for use with Bosch demolition hammers. Bearings are generally utilized to reduce the friction between rotating parts. The rollers help to distribute the weight while the minimal contact area of the ball reduces friction. Over time the rollers begin to wear out eventually requiring a replacement to ensure peak performance. Please refer to the diagrams for your exact model for the correct location and the correct installation of this hardware. This high-quality part is made of durable metal and is sold individually.
Deep-Groove Ball Bearing
Part Number: 1610900026
In Stock, 3 available
This is an original Bosch replacement part. The deep-groove ball bearing is designed by the manufacturer for use in rotary hammers and demolition hammers. This part is made of metal, and is placed to hold one end of the armature and allow it to spin freely. Please be aware that there are different ball bearings used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver when replacing this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This part is sold individually.
Deep-Groove Ball Bearing
Part Number: 1610905028
Ships in 5 - 11 business days
This is an authentic replacement part, sourced from the original manufacturer for use with Bosch rotary hammers. The special deep groove ball bearing is commonly used to reduce friction between the rotating gear on the armature and the fixed gearbox housing. This ball bearing is available as an individual replacement part.
Needle-Roller Bearing
Part Number: 1610910035
In Stock, 2 available
This authentic part is sourced directly from the original equipment manufacturer for use with Bosch demolition hammers. Ball bearings are used to reduce friction between rotating parts. Unfortunately, over time it may wear out, or get damaged eventually causing it to fail eventually requiring a replacement to maintain peak performance. Keep in mind this high-quality bearing is made of durable metal and is sold individually. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct location and application of this bearing.
Needle-Roller Bearing
Part Number: 1610910091
Ships in 5 - 11 business days
D35xD47x17
Needle Bearing
Part Number: 1610910007
Ships in 5 - 11 business days
Ball Bearing
Part Number: 1610910049
In Stock, 4 available
This is an original Bosch replacement part, sourced directly from the manufacturer. The ball bearing is found in Bosch rotary and demolition hammers, attached to the connecting rod in the barrel. Please be aware that there are different ball bearings used in the machine. Refer to the parts diagram to be sure of ordering the correct part. This part includes a metal ball bearing and metal cylinder. You will require a screwdriver and needle-nose pliers to replace this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly.
Bearing Pedestal
Part Number: 1615805069
Ships in 5 - 11 business days
Thrust Bearing Disc
Part Number: 1610101608
Ships in 5 - 11 business days
Deep-Groove Ball Bearing
Part Number: 1610900027
Ships in 5 - 11 business days
Ø25xØ52x15
Deep-Groove Ball Bearing
Part Number: 1610900025
In Stock, 3 available
DIN 625-627-2Z
Bearing End Plate
Part Number: 1615500376
Ships in 5 - 11 business days
no image
Part Number: 1610910097
Ships in 5 - 11 business days
Needle Bearing
Part Number: 1610913001
Ships in 5 - 11 business days
Show More
no image
Part Number:
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy