OEM Milwaukee Parts & Accessories – eReplacementParts.com

$7.66

Manufacturer Part Number:: 44-40-0035

Genuine Milwaukee replacement part, this item is sold individually. This Flange nut is threaded on the spindle of the Milwaukee Grinders shown below. You first place the inner flange on the spindle , part number 43-34-0036. Then you place the grinding wheel of choice on the spindle. The Flange Nut is then threaded on the spindle preferably by using a spanner wrench which fits into the holes of the Flange Nut.

Pulley Tire

$5.95

Manufacturer Part Number:: 45-96-0050

Pulley Tire

★★★★★

(9)

$5.95

Manufacturer Part Number:: 45-69-0030

This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The ti...

Carbon Brush Set

★★★★★

(4)

$13.85

Manufacturer Part Number:: 22-18-2250

Genuine Milwaukee replacement part Includes two Carbon Brushes with wire lead,Brush Spring & Brush Holder. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is becau...

Carbon Brush Assembly

★★★★★

(11)

$14.58

Manufacturer Part Number:: 22-18-2240

This is a genuine Milwaukee replacement part. It is sold as a Set of 2. It includes the brush, brush holder & brush spring. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool part...

Carbon Brush Assembly

★★★★★

(9)

$5.95

Manufacturer Part Number:: 22-18-0680

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is bec...

Blade Pulley Tire

★★★★★

(50)

$17.07

Manufacturer Part Number:: 45-69-0010

This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The ti...

Shoe Assembly

★★★★★

(7)

$21.57

Manufacturer Part Number:: 45-16-0645

This is a genuine Milwaukee replacement part. It is sold individually for the Milwaukee Sawzalls listed below. The Shoe Assembly helps guide the blade where you want to cut. It is adjustable by pulling down on the 31-52-0090 Shoe Release Lever, for use of longer or shorter blades. The foot pivots for cutting angles. The saw should not be used without this part or it could damage the saw. Part is e...

Paddle Trigger Assembly

$8.68

Manufacturer Part Number:: 31-92-0210

This paddle trigger assembly is supplied by the original manufacturer for use in angle grinders. It allows the user to control the speed and operation of the equipment. The paddle is 5 inches long and 1.25 inches wide. It includes a switch that activates the motor and allows the grinding wheel to spin and a safety lock to prevent accidental starting. If the grinder does not start when you press th...

Brush Assembly

★★★★★

(8)

$6.15

Manufacturer Part Number:: 22-18-0075

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. Two brushes are needed for the tools shown below. • Worn brushes are often the cause behind a a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most c...

Handle Assembly - Single Speed

★★★★★

(3)

$28.98

Manufacturer Part Number:: 31-44-2661

This is an authentic replacement part manufactured for use with Milwaukee impact drivers. The special handle assembly is used to house the switch assembly and motor. This handle assembly includes both sides and is available as an individual replacement part. Please see model diagram for associative parts.

Inner Disc Flange

★★★★★

(6)

$9.42

Manufacturer Part Number:: 43-34-0935

This is a genuine Milwaukee replacement part, sold individually. The Milwaukee 43-34-0935 Inner Disc Flange is placed on the spindle of the hand held grinder. Its purpose is to secure the grinding wheel to the spindle and act as a support for the grinding wheel, along with the Flange Nut (44-40-0035). This part is compatible with the Milwaukee Grinders that are shown below.

Milwaukee Parts

Popular Milwaukee Product Types

Popular Milwaukee Parts

Popular Milwaukee Models

All Milwaukee Product Types

Milwaukee Parts

Search By Model or Part Number

Popular Milwaukee Product Types

Popular Milwaukee Parts

Popular Milwaukee Models

All Milwaukee Product Types