This is a genuine Milwaukee replacement part, it is sold individually.
The purpose of the 06-75-3150 Screw is to secure the chuck to the spindle of the models listed below.
This is a left hand threaded screw, to remove it turn it clockwise.

We do have an article and video on

Genuine Milwaukee replacement part
Includes 1 Carbon Brush sold individually. Please go to the schematic listings for your tool to find the brush assembly parts compatible with this carbon brush and your tool. This carbon brush will fit a wide variety of Milwaukee tools.

• Worn brushes are frequently the cause of a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.

Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

The Milwaukee Belt Hook is attached to the bottom of the handle assembly on the tool model numbers shown below.
Its purpose is to hook the tool to your belt when not using the tool.

To attach the belt hook to the handle you will also need to order part number 06-82-5275 Screw.

This is a genuine Milwaukee part.
It is sold individually.
It attaches to the bottom of the housing on a Milwaukee cordless drill.

Its purpose is to hold the small screwdriver bits that are inserted into magnetic bit holders.

It is compatible with the Milwaukee tools shown below.

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually.
This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord.
Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature.

To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place.
The Cord has a 5-15P NEMA type plug.

This is a genuine Milwaukee replacement part, it is sold individually.
The Milwaukee 14-46-2012 Brush Card Assembly uses four brushes, whereas most power tools use two brushes.
To replace this part you will need to release the spring tension on the brush then place the brush card in its proper position.

Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.

Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.