Fuel Tank Cap Connector

Carb cleaned and replace gaskets diaphram

Removed fuel lines from air purge body assembly. Removed the purge bulb retainer. Removed fuel line grommet from fuel tank by prying out with a screw drive. Inserted new fuel line, fuel vent line, and fuel return lines in new fuel line grommet. Inserted new grommet with lines into fuel tank by carefully using a screw driver to push grommet into the opening. Then inserted fuel tank vent into the vent line. As a precaution, I changed out the air purge body assembly. Attached the fuel line and the fuel return line to the air purge body assembly. I had taken a photo of the connections before dis-assembly to be sure I got the lines back in the right places. Installed the new purge bulb and reinstalled the purge bulb retainer. Hedger now runs great.