This is a genuine Husqvarna replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and video on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Just like the one I removed
Exactly like the one I removed. Installed this new filter, new gas lines, and a new primer bulb. Started running my blower on Trufuel and it runs like new again.
Guest - April 26, 2019
Verified Purchase
★★★★★
★★★★★
Easy going!
Easy fix! Leaf blower runs like a champ!
Guest - May 28, 2019
Verified Purchase
★★★★★
★★★★★
quick fix
worked great
Guest - June 12, 2019
Verified Purchase
★★★★★
★★★★★
Easy fuel filter exchange
Quick delivery, easy install. The leaf blower works like new.
Guest - June 17, 2019
Verified Purchase
★★★★★
★★★★★
Haven’t got to replace yet but I’ve had good luck in the past. So let’s hope it continues.
Had to wait on it for a while but finally got it, can’t wait to put it on.
Guest - July 6, 2019
Verified Purchase
★★★★★
★★★★★
the fuel filter was exactly what we needed. The rep that helped knew immediately the right part so we had no wait or hassle. The 2 filters worked on both saws.
Part arrived quickly, was the correct part, and we were able to use our saw immediately. Great service and quality part.
Guest - November 21, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
Filter fit and works perfectly
Guest - June 16, 2021
Verified Purchase
★★★★★
★★★★★
Fast shipping, fair price.?
OEM parts for my chainsaw, fit perfectly.?
Guest - March 5, 2022
Verified Purchase
★★★★★
★★★★★
Chainsaw repaired
Great parts at a good price.
Guest - October 20, 2022
Verified Purchase
★★★★★
★★★★★
Chain Saw
Parts fit perfect arrived quick,Would definitely recommend
Guest - August 15, 2019
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed old spark plug and replaced with new spark plug.
2. Removed old air filter and replaced with a new air filter
3. Fished the fuel line from the fuel tank with a wire with a hook on it and removed the old filter and connected the new filter
1. Removed engine cover.
2. Removed fuel tank
3. Replaced fuel line and return line
4. Put new fuel filter in tank
5. Replaced tank and cover
6. Installed new spark plug and air filter started right up
1. Took pictures before I took it apart.
2. Removed all the plastic.
3. Removed the tank.
4. Replaced the hoses and filter on the tank.
5. Replaced the fuel primer on the main unit.
6. Mounted the new hoses to the new carburetor.
7. Removed the old carburetor.
8. Installed the new carburetor and g
... Read moreasket to the trimmer.
9. Reinstalled the tank and all the plastic.
10. Started the trimmer and made adjustments to the carburetor.
11. Installed the carburetor stops to the Jets.
Read less
Did you find this story helpful?
Thank you for voting!
Chain saw would start but would die when I gave it gas.
1. Pull out the fuel filter with a piece of a wire shaped like a hook. Changed out the filter. Just pull off the fuel hose.
2. Put in the new spark plug. (used a spark plug socket)
3. Popped off the air purge (used pliers). Undo two small hoses first. Snapped the new one on and reconnected both hoses.
Removed the air filter and replaced it with the new one
Removed the old spark plug and gapped the new one at 0.025 then installed it
Used a set of forceps to grab the fuel line in the tank and pull it out.
Removed the old fuel filter and installed the new one, then put it in the tank
Saw run great
Watched video for procedure. Very informative and helpful!
1. Removed top cover and spark plug.
2. Removed side cover/brake and chain bar.
3. Inserted piece of rope into combust. chamber.
4. Removed clutch/drum assy, rim sprocket and support bushing.
5. Reversed procedure for install.
6. Replaced fuel f
... Read moreilter and air filter.
7. Adjusted chain, lubed sprocket, started saw, cut wood.
1. Confirmed that the replacement parts were the same.
2. Removed the old fuel hose and the grommet.
3. Fished a wire through the new fuel line and then through the tank up to the carburetor. 4. Lubed the integral grommet on the hose with oil
5. Started the hose through the hole, held it in place, installed the new fuel
... Read more filter, and pulled the new hose into position.
6. Hooked the hose to the carburetor and finished putting my saw together. Job done!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12661913
Manufacturer Part Number: 591375401
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
