Shop All Dynabrade Parts
We sell only genuine Dynabrade ® parts.
Enter Your Model Number
Shop Dynabrade Parts & Product Types
All Dynabrade Replacement Parts
Dynabrade Repair Articles
| How to Diagnose a Bad Power Cord or Switch | How to Replace a Vacuum Power Cord |
 |  |
| This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test... | Replace your vacuum's power cord with these simple repair steps, a smart way for vacuum owners to save time and money... |
Same Day Shipping
Toll Free Support
Repair Help & Videos
Commonly Purchased Dynabrade Parts
See More +
Most Popular Dynabrade Replacement Parts
Dynabrade Rotor And Blade Set
In Stock
Part Number: 57113
$72.09
This is a genuine Dynabrade replacement part designed for use with sanders/buffers. It fits inside the cylinder assembly. This set includes a plastic rotor and a set of five (5) blades. To replace it you will need a screwdriver and pliers.
Dynabrade Muffler Insert
3 Reviews
In Stock
The purpose of the 56027 Muffler is to lessen the noise of the air coming from the exhaust of the tools listed below.
It will also filter out the excess oil that is in the tool.
Once these Inserts get dirty and clogged they should be replaced.
Part Number: 56027
$4.99
Genuine Dynabrade replacement part, this item is sold individually.The purpose of the 56027 Muffler is to lessen the noise of the air coming from the exhaust of the tools listed below.
It will also filter out the excess oil that is in the tool.
Once these Inserts get dirty and clogged they should be replaced.
Dynabrade Blades/rotor (4 Pack)
In Stock
Part Number: 01011
$30.30
These blades in your die grinders are located on the rotor within the motor housing. This OEM set includes four blades, each measuring approximately 1-1/2 inches by 3/8 inches. When the tool is turned on, the motor drives the rotor, causing the blades to spin rapidly and help you shape various materials. It is important to regularly check the condition of the blades and replace them if they are visibly worn out or misaligned. Additionally, pay attention to any unusual signs during operation, such as increased noise, vibration, or burning smells. To replace the blades, refer to your user manual for detailed instructions on how to disassemble the motor housing. Typically, you will need to secure the tool in a padded vise, then use an adjustable pin wrench to remove the lock ring. Proceed with disassembling the tool by removing the collet and rotor nut from the rotor shaft, followed by the cylinder, spacer, and the four blades from the rotor.
Dynabrade Idler Wheel Assembly
In Stock
Part Number: 11011
$114.94
This is a Genuine OEM sourced replacement part designed for Dynabrade Dynafile. This Idler Wheel helps to support and drive the Sanding Belt. It is made out of Metal and it is Sold Individually. This assembly includes the Wheel, Bearing and a Bolt that secures it.
Dynabrade Tip Valve
In Stock
Part Number: 01472
$10.07
This is a genuine OEM part. The Dynabrade tip valve is manufactured for use with orbital sanders, finishers and grinders. This metal and plastic valve often sits in the air inlet bushing, and is supported by a spring. The valve is sold individually, please see specific manual for additional repair information. A pair of pliers, wrench and a screwdriver may be necessary for installation.
Popular Dynabrade Models
Dynabrade Repair Articles
| How to Diagnose a Bad Power Cord or Switch | How to Replace a Vacuum Power Cord |
| |
| This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test... | Replace your vacuum's power cord with these simple repair steps, a smart way for vacuum owners to save time and money... |
Customer Feedback
I received these parts and it was quicker than I thought it would be. Thanks a lot! I'll use you again when needed.
Michael S.
Montana, USA
