OEM Craftsman Tiller Parts & Accessories

Carriage Bolt 5/16-18 x 3/4" Lg. – Part Number: 710-0451

$6.40

Minimum Quantity of 2 required

Manufacturer Part Number:: 710-0451

Genuine Manufacturer Approved Carriage Bolt is a standard part that fits a variety of products. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the work piece it measures 5/16-18 x .75. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.

Tiller Wheel Shaft Oil Seal

★★★★★

(11)

$17.37

Manufacturer Part Number:: 921-04031

Nut-flglk 5/16-18

★★★★★

(5)

$6.16

Manufacturer Part Number:: 712-04063

This is a genuine manufacturer-sourced replacement hardware that is commonly utilized on Craftsman lawn and garden equipment. A lock nut is a type of nut that resists loosening when it is properly threaded onto a bolt. This is a standard hardware which has multiple applications depending on your unit, make sure to check appropriate diagrams for correct location and use of this item. Please note th...

Clevis Pin

★★★★★

(4)

$7.13

Minimum Quantity of 2 required

Manufacturer Part Number:: 532132673

This is a genuine component which is specially designed for use with Poulan, Husqvarna, Weed Eater and Jonsered tillers. It is supplied directly from the original equipment manufacturer. This item provides a high-quality replacement for a missing or a faulty hardware that was installed on a new unit. The clevis pin is installed in order to protect your tiller. If the auger gets jammed or clogged, ...

Bolt

★★★★★

(1)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 595901601

This is a genuine OEM replacement part that is used for lawn mowers and tractors across a number of brands. This is standard hardware which has multiple applications based on your tool. Please refer to diagrams for proper application. It is made out of metal and it is sold individually. You would need a wrench to remove or install this bolt.

Tiller Forward Drive Belt

★★★★★

(15)

$28.90

Manufacturer Part Number:: 954-04090

Genuine Manufacturer Sourced replacement part used on Walk-Behind Push Mowers. This is the Belt which connects to the Transmission and allows mower to mower forward. This part is made out of Rubber and it is Sold Individually. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to mai...

Cultivator Air Filter

★★★★★

(4)

$6.16

Manufacturer Part Number:: 753-05996

This filter is an authentic OEM replacement part sourced directly from the manufacturer. It is commonly used in MTD and Troy-Bilt tillers and cultivators. This part filters the air entering the carburetor. Without a proper air filter, the machine may stop running. It should be replaced if it is worn or clogged beyond cleaning. It is sold individually, and a screwdriver is needed to replace it.

Belt-v Rev Drv 3

★★★★★

(5)

$27.41

Manufacturer Part Number:: 954-04091

This is a Genuine OEM Sourced replacement part used on Walk-Behind Push Mowers and RotoTillers. This is the Belt which connects to the Transmission and allows mower to drive reverse. This part is made out of Rubber and it is Sold Individually. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them...

Fuel Tank Asm

★★★★★

(10)

$34.81

Manufacturer Part Number:: 753-06797

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman trimmers. The fuel tank houses the fuel used to power the machine. This part is made of hard plastic and is sold individually. The fuel cap and fuel lines are included in the assembly. For installation you will need a screw driver to remove and shrouds and covers.

Line, Fuel Return

★★★★★

(12)

$11.24

Manufacturer Part Number:: 791-181086

This fuel line is an original part from Craftsman for trimmers, blowers, edgers and cultivators. This part is supplying gas, starting with the tank to the carburetor. You will need a screw driver, pliers, a hose pulling wire and cutters to replace this part. This fuel line is made of rubber and sold individually.

SPARK PLUG 4 CYCL

★★★★★

(23)

$11.53

Manufacturer Part Number:: 794-00082

Nut Lock

★★★★★

(5)

$6.16

Manufacturer Part Number:: 596040501

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

Craftsman Tiller Parts

Top Craftsman Tiller Models

Popular Craftsman Tiller Parts

Craftsman Tiller Models

Shop by Popular Craftsman Tiller Part Types

Craftsman Tiller Parts

Search By Model or Part Number

Top Craftsman Tiller Models

Popular Craftsman Tiller Parts

Craftsman Tiller Models

Shop by Popular Craftsman Tiller Part Types