This is an adjustable burner bracket designed for use with Char-Broil grills. It contains stainless carryover channels. Adjusts 23-1/2" to 25". Includes 2 bar extensions, 2 angled extensions for brackets ending at an angle, hardware and instructions. Fits burners up to 2-5/8" wide. You would need a screwdriver to complete this repair.
Burner Brace With Carryover Tu 80012481
OEM part for: Char-Broil
Part Number: 80012481
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 22 machines
Char-Broil
This item works with the following types of products:
This part replaces obsolete part #: 80002950, 80002834, 80001178, 80001440, 80001438, 80002930, G40803000000, 80000683
Repair Videos ?
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Burner Brace With Carryover Tu
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The burners had never been replaced after 5 years. The carryover tube was falling apart with rust and corrosion.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
2. Took wrench and screwdriver and removed the single bolt/nut off each end of grill.
3. Cleaned up the belly of the grill.
4. Assembled the new L bracket to each end of the new carryover tube (do not tighten).
5. Re-attach the new carryover tube to the grill, align to center, tighten bolts/nuts.
6. Slide new burners into place and adjust the bolt on each burner to regulate the air/gas.
Grill parts were rusted out.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Burners and carry tubes were shot
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Carryover tube for burners.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Get the burners off by lifting up and to towards the back of the grill.
Get a grip on the nut below the right and left ends and a screwdriver on the to of the bolt.
Remove the old carryover tube and clean the mounting position for the new one to sit properly.
Reverse order to install new tube while making sure the open slots face FORWARD.
Fire up grill and enjoy the summer.
5 years of use - corrosion/rust
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Burner brace was burned through and needed replacement
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Adjustable Wrench
Parts Used
Burners not working properly.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Adjustable Wrench
Parts Used
I moved the grill and realized that it needed an internal over-haul
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
1. Removed the flame reducers
2. Removed the cast iron burners
3. Removed what was left of the old burner brace. Some of the carryover tubes had eroded away. The nut on one side was frozen on the bolt. I ended up grinding off the head.
Carryover tube badly rusted as well as the grease pan
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Cross over tube rusted out.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Adjustable Wrench
Parts Used
Assembly of the new cross over tube was simple, and instructions had the different combinations pictured. The included hardware included the bolts and washers needed, but I was short two nuts for reattaching the assembled crossover tube to the grill.
I was able to reuse the old nuts so not an issue.
The best part is, it works like it's supposed to!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.