Bandsaw Replacement Parts
Search By Bandsaw Model or Part Number
Most Popular Bandsaw Replacement Parts
It is sold individually
Two tires are needed on the Bandsaw.
If one tire is worn, it is advisable to replace both at the same time.
The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly.
The tires simply stretch onto the pulleys. No tear down of any parts is needed.
This brush set will fit the Makita tools listed at the bottom of the page.
• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking
Carbon motor brushes are one of the most commonly replaced power tool components.
Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.
Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.
A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.
When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
It is sold individually
Two tires are needed on the Bandsaw.
If one tire is worn, it is advisable to replace both at the same time.
The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly.
The tires simply stretch onto the pulleys. No tear down of any parts is needed.
The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction.
This reduces wear on the tool and allows it to run smoothly.
It is sold individually
Two tires are needed on the Bandsaw.
If one tire is worn, it is advisable to replace both at the same time.
The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly.
The tires simply stretch onto the pulleys. No tear down of any parts is needed.
Popular Bandsaw Models
.png)
Shop Bandsaw Parts by Brand
Bandsaw Help & Repair Articles
| How to Diagnose a Bad Power Cord or Switch | How to Change a Bandsaw Blade |
 |  |
| This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test... | Changing a bandsaw blade only takes minutes with the help of this article's professional power tool tips, including... |
