This is a genuine NuTone replacement part that has been OEM sourced to ensure a high-level of quality. The vent assembly is intended to be used with ceiling heaters and exhaust fans. The vent includes the fan, motor, bracket, and it is sold pre-assembled. This part is priced as a single item.
Vent Assy Complete S97017646
OEM part for: Nutone, Broan
Part Number: S97017646
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 27 machines
Nutone
Broan
This item works with the following types of products:
- Heater Parts
This part replaces obsolete part #: 97017646
Repair Videos ?
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Vent Assy Complete
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Vent motor burnt out
Tool Type
Ventilation
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
2. Ordered a new unit
3. Awaited replacement
4. Installed new unit (utilizing old housing,
5. Tested to verify installation method.
Exhaust (vent assy.) fan motor was squealing, vibrating and sometimes seizing.
Tool Type
Ventilation
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Removed the motor and blower wheel from the housing.
Removed the motor and blower wheel from the new vent assembly.
Cleaned the complete ceiling unit which includes a room light, night light, heating unit and exhaust fan. This unit is located in our bathroom and was caked with dust. I clean this unit twice per year and would recommend anyone that has one or something similar to do so at least annually.
Installed the new motor and blower wheel in the old housing.
Reinstalled in ceiling unit.
Works like new.
The make up of the motor assembly
Tool Type
Ventilation
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Adjustable Wrench
Parts Used
Remover the three motor assembly screws.
The Model number 66RP-B was the bear. I had to install the motor bracket. The assembly holes where hard to get to because of the light fixture. I guess if I had a phillips screw start that would of help. The one that only needed the motor assy only took 30 minutes or so.
Ventilation fan in bathroom was 24 years old. It was squealing loudly when it ran.
Tool Type
Ventilation
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Power Drill, Nutdriver
Parts Used
Vent fan was not working worn out 30 yrs old.
Tool Type
Ventilation
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver, Power screwdriver
Parts Used
Nutone 668rp bathroom fan motor stopped working
Tool Type
Ventilation
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, none
Parts Used
Motor stopped working
Tool Type
Ventilation
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver, Lighting
Parts Used
The new all metal vent assy was larger than the plastic version which required the electrical inside cover to be mounted correctly
Tool Type
Ventilation
Difficulty
Hard
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wire stripper and cutter
Parts Used
1) Remove cover
2) Pull out all wiring and undue all connections
3) Cut back more outer jacket and shorten and re-strip wire length
4) Remake all connections
5) Replace all wiring into the box and reinstall the inside cover
6) Install the replacement fan
Note: if cover had been properly install originally there would have been no issue. If installing a complete new heat/light/fan unit be sure to keep all wire connections as small as possible as there is very little room in the small box.
Bathroom ventilation fan squeeked
Tool Type
Ventilation
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
2. Compared replacement part (complete assembly) with old parts.
3. The new bracket was bent/crushed in shipping and was unusable.
4. Fortunately, I had saved all of the old parts and the new fan and motor were undamaged.
5. Reassembled using new motor and fan and old bracket.
6. Mission accomplished!
Loud motor
Tool Type
Ventilation
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
All went well
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.