Vent Assy Complete S97017646
- Manufactured by:
- Nutone
- ERP Number:
- ERP10432270
- Part Number:
- S97017646
Does this part fit my model?
Need help finding your model number?Product Description
?This is a genuine NuTone replacement part that has been OEM sourced to ensure a high-level of quality. The vent assembly is intended to be used with ceiling heaters and exhaust fans. The vent includes the fan, motor, bracket, and it is sold pre-assembled. This part is priced as a single item.
Troubleshooting
- Nutone
- Heater
Videos For installing this part.
?
Customer Part Reviews
?- < Prev
- 1
- Next >


Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Ask our experts a question about this part and we'll get back to you as soon as possible!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hello Kevin, Thank you for your inquiry. We show part# S97017646 includes the blower wheel, motor and bracket. We hope this helps.
Hi Scott, Thank you for your question. The part number listed under your model number for the complete vent assembly is S97017646. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Hi Sheila, Thank you for your question. The parts are sold separately. The part number listed under your model number for the heating element is S89312000. The part number listed for the vent assembly is S97017646. If you would like to place an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Vent motor burnt out
Michael from Seattle, Washington
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- S97017646
2. Ordered a new unit
3. Awaited replacement
4. Installed new unit (utilizing old housing,
5. Tested to verify installation method.
Exhaust (vent assy.) fan motor was squealing, vibrating and sometimes seizing.
John from CHELMSFORD, Massachusetts
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
- Parts Used:
- S97017646
Removed the motor and blower wheel from the housing.
Removed the motor and blower wheel from the new vent assembly.
Cleaned the complete ceiling unit which includes a room light, night light, heating unit and exhaust fan. This unit is located in our bathroom and wa ... Read more s caked with dust. I clean this unit twice per year and would recommend anyone that has one or something similar to do so at least annually.
Installed the new motor and blower wheel in the old housing.
Reinstalled in ceiling unit.
Works like new.
The make up of the motor assembly
Bruce from Glen Burnie, Maryland
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers, Wrench (Adjustable)
- Parts Used:
- S97017646
Remover the three motor assembly screws.
The Model number 66RP-B was the bear. I had to install the motor bracket. The assembly holes where hard to get to because of the light fixture. I guess if I had a phillips screw start that would of help ... Read more . The one that only needed the motor assy only took 30 minutes or so.
Motor stopped working
Paul from SAN LEANDRO, California
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
- Parts Used:
- S97017646
The new all metal vent assy was larger than the plastic version which required the electrical inside cover to be mounted correctly
Robert from EAST GREENWICH, Rhode Island
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- S97017646
1) Remove cover
2) Pull out all wiring and undue all connections
... Read more />3) Cut back more outer jacket and shorten and re-strip wire length
4) Remake all connections
5) Replace all wiring into the box and reinstall the inside cover
6) Install the replacement fan
Note: if cover had been properly install originally there would have been no issue. If installing a complete new heat/light/fan unit be sure to keep all wire connections as small as possible as there is very little room in the small box.
Ventilation fan in bathroom was 24 years old. It was squealing loudly when it ran.
Gary from LAKEVILLE, Minnesota
- Difficulty Level:
- Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers
- Parts Used:
- S97017646
Nutone 668rp bathroom fan motor stopped working
Gerard from East Haven, Connecticut
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- S97017646
Bathroom ventilation fan squeeked
Leroy from Hopkinton, New Hampshire
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
- Parts Used:
- S97017646
2. Compared replacement part (complete assembly) with old parts.
3. The new bracket was bent/crushed in shipping and was unusable.
4. Fortunately, I had saved all of the old parts and the new fan and motor were undamaged.
5. Reassembled using new motor and fan and old bra ... Read more cket.
6. Mission accomplished!
Vent fan was not working worn out 30 yrs old.
Blaine from SANTA CRUZ, California
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
- Parts Used:
- S97017646
Loud motor
Edward from Hillsborough, New Jersey
- < Prev
- 1
- Next >
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.