eReplacementParts.com
877-346-4814
Powermatic Parts

Spring 6285894

OEM part for: Powermatic

Part Number: 6285894


Install
Videos!
Grid squares measure 1x1 inch
Spring - 6285894:PowermaticSpring - 6285894:PowermaticSpring - 6285894:Powermatic
In Stock
Order within the next 8 hours and your part ships today!
Easy 15-30 minutes (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
Powermatic
Does this d-block d-md-none fit my product?

Product Description ?

The spring attaches to the knob. It is made of metal and is sold individually. This is a genuine item that is supplied by the original equipment manufacturer for use with Powermatic jointers. During replacement, it may require a screwdriver to help install this part correctly. It will need to be replaced if it bends or breaks.

  • Classification: Part
  • Weight: 0.04 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 2 machines

Powermatic

54A (1791279DXK) 6 in. Quick-Set Knives Jointer View Diagrams & Manuals
54HH (1791317K) 6" Helical Cutterhead Jointer View Diagrams & Manuals
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Jointer Parts

Customer Part Reviews ?

5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Exactly the part needed for my 27 year old Powermatic 6" Jointer
    This little spring for the guard on my Powermatic jointer seemed a little illusive. It was actually a search using ChatGPT that found it here. Part arrived quickly and worked perfectly. Very happy.
    Guest - 26 days ago Verified Purchase
    The right part and an easy repair.
    The part arrived quickly and installed easily.
    Guest - April 25, 2019 Verified Purchase
    Replacement for a worn cutter guard spring
    I was surprised when I removed the cutter guard on my jointer to find the spring was badly damaged from being over-torqued. The replacement worked exactly as expected and my cutter guard is now working like new.
    Larry - April 23, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Spring


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (3 rated repairs)?

    the spring for the safety shield snapped

    Fred - August 14, 2020
    Tool Type

    Jointer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    I removed the shield by removing the screw that holds it in.
    than I removed the retaining ring by removing three screws
    I removed the old spring and replaced it with the new one.
    I put the retaining ring back
    reinstalled the shield
    I removed the fence
    turned the shield counter clockwise about two turns
    reinstalled the fence
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Spring on cutter guard was not effective

    Tim - November 29, 2018
    Tool Type

    Jointer

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Removed old spring and replaced per the instructions. Took a couple of tries to get the tension correct on the blade guard but now works as good as new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Jointer had no spring for blade guard

    Martin - July 8, 2016
    Tool Type

    Jointer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, line up pin

    Unscrew bottom retainer and remove.place the spring in the knob. Place the upper part of the spring in the upper washer.Make sure that the screw at the bottom of the guard shaft id tight.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal