Please note shipping times may be longer than expected due to carrier delays.
eReplacementParts.com
877-346-4814
Toro Parts
Preferred Partners of

Scraper

Part Number: 23-3170
Toro
Availability: 7 in stock
Price: $27.52
Ships within 1 business day
Product Information
Manufacturer: Toro
Product Number: 23-3170
Classification: Part
Weight: 0.30 lbs.
Shipping: Ships Worldwide
Description:
This replacement part is supplied directly from the original equipment manufacturer for use with Toro snowthrowers. Scrapers are designed to absorb a lot of friction while the machine is in operation. You can tell that a snowblower has a worn scraper because it will no longer be able to clear the sidewalk, leaving patches behind. Please note, paddles and scrapers are designed to wear at approximately the same rate, so it's always a good idea to replace them both at the same time. Keep in mind this high-quality scraper is sold individually.
Compatibility

This part is compatible with the following machines:

Toro
Expand the 67 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Snowblower
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Scraper - 23-3170
Rotor Blade - 23-3730
Button Hd Carr Scr - 52-7130
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set, Hex key
Rubber flappers (rotor blade) was worn. The scraper was very worn.
Get some saw horses and put a piece of sheeting (plywood, siding, etc.) across them to make a work bench and place the snowblower on top of it. This avoids having to bend down and having shadows by trying to work on it while it sits on the ground. All the scoop, vanes and rotor blades are black, so it is hard to see.

There are a series of machine bolts that hold each flap on. Remove them. Remove flapper and replace. Assemble back together making sure to torque the machine bolts tight but not excessive. Repeat for the other side. DO WATCH OUT for KICKBACK of the rotor blade drum.

Next was the nylon? scraper. The old one was so worn that there was no longer a piece of metal bar to add extra support underneath. I went to our hardware store and purchased a 4 foot x 1/8 thick by 1/2 wide steel bar and cut it to length to fit into the scraper. I secured it to the scraper and drilled holes corresponding with the holes in the scraper and in the scoop of the snowblower BEFORE I put it on. This bar helps insure that the scraper will NOT come into contact with the flappers.

It works SOOOO MUCH BETTER with new rotor blades (flappers) and the proper scraper.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Scraper - 23-3170
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Scraper replacement
Unbolted existing and re-bolted replacement, fit was exact.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Scraper - 23-3170
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set, I used an awl to help line up the holes
The scraper on my snowblower was worn out and falling off
Took the old part off and installed the new scraper . The old bolts and nuts were broken and missing. I installed three new sets of bolts, washers, lock washers, and nut.
It was an easy repair
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Toro
Product Number: 23-3170
Classification: Part
Weight: 0.30 lbs.
Shipping: Ships Worldwide
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal