This is an original Toro replacement part. The button head carriage screw is designed by the manufacturer for use in snowthrowers. This part is made of metal, and is generally used in securing the scraper in the auger housing assembly. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver or Allen wrench when replacing this item. This part is sold individually.
Troubleshooting
This part works with the following brands:
Toro
This part works with the following products:
Snow Blower
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Get some saw horses and put a piece of sheeting (plywood, siding, etc.) across them to make a work bench and place the snowblower on top of it. This avoids having to bend down and having shadows by trying to work on it while it sits on the ground. All the scoop, vanes and rotor blades are black, so it is hard to see.
There
... Read moreare a series of machine bolts that hold each flap on. Remove them. Remove flapper and replace. Assemble back together making sure to torque the machine bolts tight but not excessive. Repeat for the other side. DO WATCH OUT for KICKBACK of the rotor blade drum.
Next was the nylon? scraper. The old one was so worn that there was no longer a piece of metal bar to add extra support underneath. I went to our hardware store and purchased a 4 foot x 1/8 thick by 1/2 wide steel bar and cut it to length to fit into the scraper. I secured it to the scraper and drilled holes corresponding with the holes in the scraper and in the scoop of the snowblower BEFORE I put it on. This bar helps insure that the scraper will NOT come into contact with the flappers.
It works SOOOO MUCH BETTER with new rotor blades (flappers) and the proper scraper.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8999748
Manufacturer Part Number: 52-7130
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1988)_WW_2.gif "Part Location Diagram of 52-7130 Toro Button Hd Carr Scr")
(1988)_WW_2.gif "Part Location Diagram of 52-7130 Toro Button Hd Carr Scr")
