Troybuilt TB146 EC tiller - four stroke
1.) Removed the 4 - 5 top cover screws
2.) Removed the air breather cover, filter and filter grate, and assembly. See the spacers in the housing for the long bolts put them back, a big help to have.
3.) Removed the carburetor.
4.) Disconnected the throttle connection from
... Read morethe carburetor.
5.) Lift and discounted the throttle cable securement from the body of the motor, use two standard screwdrivers to push in on both sides of the holder, it just lifts off and out of the way.
6.) Remove the carburetor gasket, big cardboard piece. Remember to tuck in under the plastic housing when reinstalling
7.) Remove and reinstall the spark plug if needed, did they come pre-set, the carb too.
8.) Re-install in reverse.
9.) Change the oil while you are there. Do not overfill or it will run out of the air breather assembly.
10.) The power bit starter is great, all small engines should have one of these. A standard square bit, I bet would work too.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19244663
Manufacturer Part Number: 49MASCBP953
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 49MASCBP953 Husky ELECTRIC START CHU")
_WW_1.gif "Part Location Diagram of 49MASCBP953 Husky ELECTRIC START CHU")
