This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 8 Feet Long
Disassembled polisher by removing screws in case, removed wires at connection locations, reinstalled wires. Removed brush screws in side of case, removed brushes and reinstalled new brushes. Removed wires from old switch, reinstalled wires on new switch, reinstalled case. Done
Remove strain relief for power cable from rear of saw frame. Remove top of handle where power cable enters housing. Remove cable securing clamp inside housing. Remove main switch, remove wires from switch marking correct placement.
Remove sufficient outer sheathing from new power cable to match old cable. Strip insulation from powe
... Read morer cable wires. Attach power wires to switch into correct locations. Install switch and safety lock into place. Install power cable securing clamp inside housing. Attach handle cover. Attach power cable strain relief onto cable and rear of saw frame.
Test unit.
Removed drill handle (containing switch) from drill body
Identified wiring scheme
Cut each wire pair, but left some of the departing plug wire attached to the switch wires to ensure correct rewiring with new plug.
After double checking correct wiring pair, cut off the rest of old cord wire on each pair and stripped the t
... Read morewo connecting wires
Crimped connected each new cord wire to the correct drill switch wire
Packed wires carefully into drill handle and installed the 6 screws to reattach switch handle to drill body
1. Removed the handle cover.
2. Removed the trigger switch.
3. Removed the trigger switch wires and the old cord cable.
4. Reversed the removal process and installed the new cord cable.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10153856
Manufacturer Part Number: 664630-7
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
