We Sell Only Genuine Porter Cable® Parts.
Porter Cable Band Saw Parts & Models
Popular Porter Cable Band Saw Parts
This Ball Bearing has metal shielding on both sides. This is a genuine Porter Cable replacement part that is sold individually.
This cord protector is a genuine Porter Cable replacement part and is sold individually.
Cord Protectors are designed to slide onto your cord and fit securely at the end, where it’s firm rubber will protect the base of the cord from getting bent and pinched.
Which can expose the wires and become a safety hazard.
Genuine Porter Cable replacement part, this item is sold individually.
This screw is used in various parts of the tools shown below.
It can found in each of the tools securing different internal parts of these tools.
It is a Torx T-25 screw.
This is an OEM Authorized replacement part used on specific Band Saws. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Included in part number 694978
This Trigger switch has 4 terminals and a locking mechanism on the trigger. This authentic Porter Cable replacement part is sold individually.
rnrnSwitches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are:
• The tool has stopped functioning – it refuses to start.
• The tool operates intermittently, requiring multiple tries to turn on, until eventually it won’t start at all.
• The variable speed function and electric braking aren’t working properly.rnrn3.5" L 7/8" Depth 3/4" W
This is a Genuine OEM replacement part
It is sold individually
Two tires are needed on the Bandsaw.
If one tire is worn, it is advisable to replace both at the same time.
The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly.
The tires simply stretch onto the pulleys. No tear down of any parts is needed.
This Ball Bearing has metal shielding on both sides. This is a genuine Porter Cable replacement part that is sold individually.
This cord protector is a genuine Porter Cable replacement part and is sold individually.
Cord Protectors are designed to slide onto your cord and fit securely at the end, where it’s firm rubber will protect the base of the cord from getting bent and pinched.
Which can expose the wires and become a safety hazard.
Genuine Porter Cable replacement part, this item is sold individually.
This screw is used in various parts of the tools shown below.
It can found in each of the tools securing different internal parts of these tools.
It is a Torx T-25 screw.
This is an OEM Authorized replacement part used on specific Band Saws. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Included in part number 694978
This Trigger switch has 4 terminals and a locking mechanism on the trigger. This authentic Porter Cable replacement part is sold individually.
rnrnSwitches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are:
• The tool has stopped functioning – it refuses to start.
• The tool operates intermittently, requiring multiple tries to turn on, until eventually it won’t start at all.
• The variable speed function and electric braking aren’t working properly.rnrn3.5" L 7/8" Depth 3/4" W
This is a Genuine OEM replacement part
It is sold individually
Two tires are needed on the Bandsaw.
If one tire is worn, it is advisable to replace both at the same time.
The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly.
The tires simply stretch onto the pulleys. No tear down of any parts is needed.
