This genuine Dewalt replacement part is designed for use with Dewalt impact wrenches/drivers. This set contains the right and left side of the handle/housing. Please note the screws that hold the clamshell together are not included, they are sold separately. This clamshell set is made out of plastic and it is sold individually. Replacing this set you will need a screwdriver.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect fit
Replacement case for a dewalt driver. Very inexpensive and fit perfect.
Steven - May 17, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair. Low cost to repair an expensive drill.
Quickly shipped and part was exactly as described.
Guest - July 6, 2019
Verified Purchase
★★★★★
★★★★★
Great! Worked out perfectly.
Great! Worked perfectly.
Guest - December 28, 2022
Verified Purchase
★★★★★
★★★★★
Helped me save money.
Fixing was better than buying new ones.
Guest - February 21, 2023
Verified Purchase
★★★★★
★★★★★
Exactly what was needed to fix my Dewalt Impact driver
Great part, outstanding prices, and top quality service. I called on a Sunday to place the order, spoke to a wonderfully helpful tech who explained how to make the repair, got the part within four days and got my impact driver running like new. Great company!
Guest - April 17, 2023
Verified Purchase
★★★★★
★★★★★
Perfect Fit!
Part arrived on time and fit perfect as explained. Very economical way to improve the looks of your older worn drills.
Steve - February 1, 2020
Verified Purchase
★★★★★
★★★★★
Great place to get parts
I did order parts from here and 4 days after I order my parts got perfect fit thanks
Guest - May 4, 2020
Verified Purchase
★★★★★
★★★★★
Excellent
Easy, fast , communication
Genesis - May 7, 2020
Verified Purchase
★★★★★
★★★★★
Correct part that worked perfectly
My husband's drill casing was broke and he had in duct tape together. We were thinking we would have to replace the whole thing. It was great that we could find the right part and replace it at a very low cost compared to buying a brand new drill.
Guest - June 12, 2020
Verified Purchase
★★★★★
★★★★★
Fast and easy to deal with
Great parts
Guest - July 19, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1) Removed the torx screws from the old clamshell.
2) Removed the motor, trigger assembly and battery connector from the old clamshell.
3) Transferred everything to the new clamshell.
4) Reinstalled the torx screws.
5) Did my happy dance.
Split the case, replaced parts by disconnecting electrical space ends. Reconnected. Tested and motor was opposite of desired direction. Disassembled and swapped electrical connections. Way more power than before! Looks good too with new case!
Remove the screws from the housing. Remove the right side (screw side) of the housing, help separate the halves by inserting and twisting a flat blade screwdriver if the they won\'t separate. Place the new half on the tool and press into place. Flip the tool and remove the other side of the housing again with the help of a screwdriver
... Read more if needed. Tease the rear bearing out with your screwdriver as it may be tight on this side. Place the remaining side. Be certain the fork on the forward/reverse button did not slide out of the lever on the switch. Grip the handle, snap the sides completely together, replace the screws. Novice time, 15 minutes. Second time, three minutes.
According to another reviewer, I ordered the anvil assembly AND spring. Turns out all I needed was the spring. I decided to replace the clam shell as well. I do metal roofing and my driver has taken a beating over the last couple of years.
I recommend trying to replace the spring first before you do anything else.
... Read more/>
http://www.ereplacementparts.com/spring-p-956454.html
This is the spring located just under the sleeve that holds the ball bearing in place. On my driver the small section that secures the bearing had broken off from the spring.
Remove all the screws, used a box cutter to cut sticker then opened clam shell on old impact driver, removed changing switch, then removed all electrical from old unit and held everything together as best as possible transferred to new clam shell and closed up using screws.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16526201
Manufacturer Part Number: N633132
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
