While holding closed end of retaining ring with flat edge of pliers (needle nose works well), place retaining ring on top end of impact drive. With finger (or another pair of open pliers) gently rock ring down over the top end of impact drive, allowing for the beveled edge of the impact drive to pry open the retaining ring enough to slid
... Read moree down to the retaining ring grove/slot. Once part of the retaining ring slide into the drive ring slot continue to push the ring around the shaft until the entire ring snaps into place of the retainer ring slot. Try to always have a hold of the ring while pressing down on to the shaft as the ring has spring-like memory and will tend to snap upward into the air (and become lost) if not properly seated in the ring slot.
Removed old ring and o-ring and replaced.
Took 4 Allen screws out and took impact apart to put new lever in.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
