Drain Pump Kit 280187

1. removed lower front cover and found filter to pump full of old hardware and widgets, hardened like concrete. Impeller to pump was broken. You can use a T-20 or 9/32\" to remove screws.
2. parts came in (pump, hose from pump to tub, and belt)- i thought the belt was too small, but your customer service told me it was right. W ... Read more ith a little extra determination i was able to work the belt on. Seems the old one had stretched about 4 inches.
3. Had to remove back panel to get at belt and hose connection to tub. When removing back panel only take the screws off that need to be taken off. There are four screws that hold the side to side brackets in place, they can be left in place. Remove 4 plastic clips by pulling out and sliding inward towards center.
4. Unit was 17 years old, first time inside and it looked in good condition. Amazing how few parts were in there.