Royal Upright Vacuum Parts
We sell only genuine OEM Royal ® parts.
Top Royal Upright Vacuum Models
See All ModelsPopular Royal Upright Vacuum Parts
- Manufacturer Part Number:
- RO-720310
This is a genuine manufacturer sourced replacement tyle 5 drive belt used on Dirt Devil and Royal upright vacuums. It is used to drive the brush roll assembly. This belt is made out of rubber material and it is sold individually. Over time belts will wear out and stretch requiring replacement. It is recommended to replace these belts every 6 months to ensure optimum performance. Replacing a belt ...
- Manufacturer Part Number:
- RO-AR20060
These belts are authentic OEM replacement parts. They are designed for use with one model of Royal vacuum. These flat belts help drive the rotating brush. Two belts are included per package. They are made of rubber and should be replaced regularly. A screwdriver is needed to remove the plate concealing this part.
- Manufacturer Part Number:
- RO-AR10140
This authentic item is supplied directly from the original equipment manufacturer for use with Royal vacuums. The paper bag goes inside the bag housing. No tools should be needed to replace this bag when it becomes full. This is available as a pack of seven.
- Manufacturer Part Number:
- RO-860140P
These are genuine manufacturer sourced replacement belts used on upright vacuums. It helps to drive the brushroll assembly. These belts are made out of rubber. Includes two (2) belts per order. It is recommended to replace these belts every 6 months to ensure optimum performance. You would need a screwdriver to complete a repair. • First remove nozzle guard • Slide belt off motor shaft • ...
- Manufacturer Part Number:
- RO-540310
This is a genuine Dirt Devil upright vacuum belt. It fits vacuums that use a Style 4 or Style 5 belt. This is a flat belt which is used to transfer motion from the drive shaft to the brushroll. Th brushroll spins inside the suction nozzle in order to agitate the fibers of carpet or upholstery. This loosens dirt for a thorough clean. Note that the old belt may seem larger then the replacement belt ...
- Manufacturer Part Number:
- H-902418001
This is an authentic OEM part designed for use in upright vacuums. This part fits onto the side of the machine and is accessed by opening the bag door. It is the final filter, which is the last air filter that cleans the air that is sent directly back into the room. This washable filter is designed to be reused until it is damaged or cannot be cleaned thoroughly anymore. It is sold separately.
- Manufacturer Part Number:
- RO-880262
This belt lifter is an OEM part direct from the original manufacturer for use with Dirt Devil and Royal hand vacuums. This belt lifter is used to adjust the belt on the brush roll and motor shaft. This part is made of black plastic and is sold as an individual replacement part.
- Manufacturer Part Number:
- RO-259316
This is an OEM replacement part for Royal metal upright vacuums. The lower cord hook attaches the lower handle tube and provides a place for the power cord to be stored when not in use, as well as ensuring it won't tangle. This part is made of metal and is sold individually. There are no tools required for this part, simply slide into the slot on the lower handle tube to install.
- Manufacturer Part Number:
- RO-PD0034
This is a genuine Royal replacement part that is sourced from the original manufacturer to ensure quality. The belt is used to link the motor drive shaft and the brush roll assembly. This item allows the motor and brushroll to rotate in unison. This part is sold as an individual replacement part.
- Manufacturer Part Number:
- RO-066242
It is a genuine OEM sourced item that is specially made for use with Royal vacuums. The purpose of the bag assembly is to collect the dust and dirt when using the equipment. This is an identical replacement for a missing or a damaged component that was included with a new unit. Please make sure to refer to the owner's manual for your model to ensure the correct application. Keep in mind it is made...
- Manufacturer Part Number:
- H-521048002
This is a genuine OEM replacement pedal. It is the handle release pedal, located at the bottom rear of the machine. This pedal releases the lock for the handle, so that suction is directed through the main suction nozzle at the bottom of the machine. It is sold individually. Note that the Handle Release Pedal Spring is sold separately is part # H-633197001.
- Manufacturer Part Number:
- H-440001693
It is an authentic manufacturer-supplied item that is designed for use with Hoover and Royal vacuums. This is an identical replacement for a missing or a damaged roller lifter assembly that was installed on a new equipment. It is the component which supports the unit allowing for easy movement. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. The roller lift...