OEM Bissell Upright Vacuum Parts & Accessories

$4.13

Manufacturer Part Number:: B-203-1215

This part comes directly from the manufacturer. The Lever Filter is used in many models of Bissell vacuum cleaners. This Filter fits into Lock N Seal Lever (part number B-203-1190) and is used to filter out any large particles before the motor. This Filter is made of a flexible foam. This Filter should be replaced if it becomes torn or lost. To replace this part the Dirt Cup (B-203-2453) and the F...

Roller Assembly

★★★★★

(19)

$13.46

Manufacturer Part Number:: B-203-1015

This is a Genuine OEM replacement part designed for use with Bissell Vacuums. This part is made out of Plastic. It consists of a Bracket/Roller and Plastic Wheels. Please note, Brushroll Assembly is Sold Separately. When replacing this part you will need to remove an Access Plate using a Screwdriver. Snap the roller into place, attach Brushroll Assembly and connect the belt to the spindle that turns the belt.

Vacuum Belts

★★★★★

(16)

$8.05

Manufacturer Part Number:: B-32074

Genuine Bissell replacement belts used on Vacuums. This is the Pack of Two (2) belts. Belts tend to stretch over time, so it is recommended to change them at least every 6 months for optimum performance.

Pump Belt

★★★★★

(6)

$15.25

Manufacturer Part Number:: B-010-0620

Genuine Bissell replacement part,this item is sold individually. This belt is driven by the motor to operate the Pump Assembly for the models listed below. Overtime the Belt will wear and stretch, causing the pump to not work properly. It is advised to get an extra belt to keep on hand.

15 Brush Assembly

★★★★★

(2)

$37.53

Manufacturer Part Number:: B-203-1283

This is a genuine OEM approved replacement part designed for use with Bissell vacuum cleaners. It spins to pick up the dust and dirt from the carpet. This part is made out of plastic and it is sold individually. When replacing this part you will need a screwdriver. • Remove access plate and take off the belt • Remove old brush roller and snap the new one into place • Connect belt to the sp...

Pivot Arm Retainer Assembly

★★★★★

(3)

$4.13

Manufacturer Part Number:: B-555-9113

This authentic OEM retainer assembly secures the left and right pivot arms of the brush roll assembly on your steam vacuum. The pivot arms allow the brushes to move and adjust to various surfaces for effective cleaning, and the retainer assembly ensures they stay in place during operation. The assembly comes with the necessary hardware for replacement and is typically located on the sides of the f...

Brush Roll

$21.94

Manufacturer Part Number:: B-160-1962

This is a genuine replacement part sourced directly from the manufacturer. The brush roll is found in Bissell carpet cleaners. This part is made of high-quality plastic with nylon bristles, and is used to loosen dirt from the carpet for vacuuming. You will require a screwdriver when replacing this item. The brush roll is sold as an individual replacement part.

Roller Assembly W/ Axle

★★★★★

(1)

$7.85

Manufacturer Part Number:: B-203-8070

This part is an OEM Part from Bissell for use in upright vacuum. The roller assembly connects to the height adjustment knob at the top of your machine, depending on the level the height adjustment is set to the roller assembly rises and lowers. This roller assembly includes the front wheels and the axles. This part is a separately sold part and is made of durable plastic components.

Pre Motor Filter

$5.79

Manufacturer Part Number:: B-203-1374

This pre-motor filter is an OEM part from Bissell and is specifically designed to be used in an upright bagless vacuum. This part is used to filter any dust or debris before they enter the motor. Unfortunately, over time this part can become clogged or worn out and needs to be replaced. This part is made of a high-quality foam material and is sold as an individual replacement part.

Crevice Tool

★★★★★

(2)

$7.19

Manufacturer Part Number:: B-203-1063

This part comes directly from Bissell. The Crevice Tool is used with many models of Bissell vacuums. The Crevice Tool is made of a dense plastic and is used to vacuum out all the hard to reach places where space is limited. This tool is great for corners, folds, and cracks. No tools are needed to attach this tool to the hose. This part should be replaced if the tip becomes cracked or there is a cl...

Post Motor Filter

$21.70

Manufacturer Part Number:: B-203-2663

This is a genuine Bissell replacement part that has been sourced from the original manufacturer to be used with upright vacuums. The filter fits into the post motor tray. The filter is used to prevent dust and debris from entering the motor. This item is sold as an individual replacement part.

Foam Filter

★★★★★

(10)

$9.90

Manufacturer Part Number:: B-203-8161

Genuine Bissell replacement part, this item is sold individually. This Filter is a Pre-Filter, which means it will pick larger debris that the Vacuums pick up before it enters the main Filter. The main Filter will pick up the smaller particles and debris. The B-203-1192 Foam Filter can be washed with water and then left to dry before using it again. Do not use soap when washing this Filter, use water only.

Bissell Upright Vacuum Parts

Top Bissell Upright Vacuum Models

Popular Bissell Upright Vacuum Parts

Bissell Upright Vacuum Models

Bissell Upright Vacuum Parts

Search By Model or Part Number

Top Bissell Upright Vacuum Models

Popular Bissell Upright Vacuum Parts

Bissell Upright Vacuum Models