Part Location Diagram of B-203-7593 Bissell Circular Filters
See part 4 in the diagram
( Grid squares measure 1x1 inch )

Circular Filters B-203-7593

Manufactured by:
Bissell
ERP Number:
ERP10271827
Part Number:
B-203-7593
Original Equipment Manufacturer ?
$14.79
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(9 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine OEM pre-filter designed for use with Bissell upright vacuums. This filter is located inside of the bottom of the dirt cup. Check the inner and outer circular filters in the filter cup, as well as the pre-motor filter at least once per month and clean or replace as needed. This assembly consists of one (1) pleased paper filter and one (1) foam filter.

Troubleshooting

This part works with the following brands:
  • Bissell
This part works with the following products:
  • Upright Vacuum

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(9 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Air Filter needed to be replaced

Manuel from San Antonio , Texas

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
B-203-7593
Remove the dirt cup and removed the filter , place the new filter in and replace the dirt cup.
Did you find this story helpful?
Thank you for voting!

Just needed new filters.

Patricia from PETOSKEY, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
B-203-7593
Took out the old filters and secured the new ones.
Did you find this story helpful?
Thank you for voting!

Wheels kept falling off

Gary from Roswell, New Mexico

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
B-203-7626, B-203-7593
Removed old wheels
Snapped in new ones
Changed Filter
Ready to go in less that 5 minutes
Did you find this story helpful?
Thank you for voting!

Vacuum wheels kept falling off

Philip from coral springs, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Removed the old wheels and snapped the new ones right on
Removed the bottom of the vacuum, removed the the brush roll & old belt, and installed the new one, by placing it around the motor and the end of the brush roll, then pulling the brush roll back into its brackets.
Installed the bottom of the vacuum
Removed the dirt cup and replaced the filter
Did you find this story helpful?
Thank you for voting!

Needed a new filter !!!

William from Tallahassee, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
B-203-7593
Opened the vacuum catch, removed bottom section to get to filter, removed old and replaced with new !!!
Did you find this story helpful?
Thank you for voting!

Two of the same type of Mini Canister Vacuums from Bissell with broken roller floor bars

Barb from Oak Forest, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
I removed the roller bars from both machines and also replaced the filters. One vacuum had a broken Nozzle/ squeegee/front wheel. I also replaced that. These vacuums are older models but I love them. One was an Easy Clean and one was a Pro model but the parts interchange. I am so happy I fixed both of them myself and I think your web site is fabulous! Thanks so much!

Sincerely,
Barb H.

PS Just used a screw driver to remove the old parts.
Did you find this story helpful?
Thank you for voting!

Vacuum filter

David from Tucson, Arizona

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
B-203-7593
Took old filter out put new filter in.
Did you find this story helpful?
Thank you for voting!

No suction

Gwenlyn from Belding, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
B-203-7593
Rwmoved old filter, replaced with purchased one.
Did you find this story helpful?
Thank you for voting!

Clogged filter

Richard from Martinsville, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
B-203-7593
Cleaned the canister and installed the new filter
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10271827
Manufacturer Part Number: B-203-7593
Brand Model Number Description
Bissell 23T7 Upright Vacuum - Easy Vac Upright Vacuum