This item has been sourced from the original manufacturer to ensure a high level of quality. The blower wheel is intended to be used with wet/dry vacuums from Ridgid. The blower wheel fits into the motor housing and is used to force air through the collector. This item is sold as a single part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Updated construction looks like it will last longer.
This part did the trick. A friend posted a shop vac for sale so I asked him if he just wanted me to repair it for him. He thought it was the motor that was shot but once I took the unit apart, I discovered that it was just the blower wheel. I purchased it and a new gasket to do the repair right. It works great, it truly sucks!
Guest - April 5, 2020
Verified Purchase
★★★★★
★★★★★
vacumm repair
worked perfect, my vacumm works like new
Roy - June 2, 2020
Verified Purchase
★★★★★
★★★★★
Ridgid blower repair
The part fit and performed as designed,blower works like new! I especially liked the installation instructions included in the shipment . You will get more of my business !!
Guest - July 16, 2020
Verified Purchase
★★★★★
★★★★★
Repair blower
My blower is working like new 20 years young
Guest - July 16, 2020
Verified Purchase
★★★★★
★★★★★
works great!
I use the blower part of my wet vacuum a lot, so glad to be able to fix it with the part I ordered!
Guest - September 5, 2020
Verified Purchase
★★★★★
★★★★★
Great product and awesome customer service
The blower wheel didn’t fit because I have the detachable blower. I will use ereplacementpart in the future for anything else that I need/want to replace. The customer service is impeccable!! Great job folks. So glad I found you guys and look forward to doing business in the future!
Guest - March 22, 2021
Verified Purchase
★★★★★
★★★★★
Great part
Part was as described and cheaper than buying a new blower/vac. Since it was at least 18 years old, not an easy repair as I had to grind a screwdriver notch in other end of shaft to hold shaft still to put but back in bolt. But all fixed now and hope to get many more years out of it.
Guest - May 3, 2021
Verified Purchase
★★★★★
★★★★★
Simple repair
I was surprised to see that the replacement part was built better than the original!
Chris - November 1, 2023
Verified Purchase
★★★★★
★★★★★
Just like original part, easy to install, works great
Just like the original part, easy to install works great.
Guest - August 22, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I opened the motor housing (removed screws), removed old impeller (blower wheel) with a wrench, replaced the new impeller. Since the foam seal between the motor housing and the impeller housing had deteriorated/destroyed when opening, I placed a bead of old caulk I had on hand around the edge of the impeller housing. Reassembled. Done.
Removed all parts assembly\'s from 2 pc. housings. Did not need spacer I ordered, but will keep it for the other 4 vacs I have. Removed alum. wheel with wood stick in motor fins (to prevent turning) and 1/2\" wrench on motor shaft nut. Removed washer, below nut. New wheel in place, washer, Nut tightened with gloves holding alum. wheel. R
... Read moreeassembled every screw, everywhere.
Photocopied instructions were so faded I could not read.
It was an easy fix.
My best suggestion is to maintain all internal filters way before you think they need to be cleaned.
Disassembled to identify problem, ordered part. Pleasantly surprised by strengthening of area of breakage. Installed new part and reassembled.Works like new.
Ordered new blower wheel but found the original wheel was 4 inch diameter not 5 inch.
Not sure vac would work with a 5 inch wheel and no room for air flow.
Removed the casing to the blower wheel. Removed the nut holding the original blower wheel. Added the new blower wheel to the assembly. Re-assembled the blower casing. works like new
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11869506
Manufacturer Part Number: 73507
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
