This replacement filter is specially designed for use with Shindaiwa trimmers and brushcutters. It is an authentic OEM sourced item, not an aftermarket imitation. The purpose of this filter is to prevent dust and other debris from contaminating the engine. Please note, this foam filter is sold individually. Replacing this filter is a very simple task that will only require a screwdriver. • Remove the cover screw • Remove cover and take out the old filter • Secure the new filter • Reassemble and test the unit
Removed all surrounding shroud around engine
Disconnected the throttle cable
Disconnected the straight shaft from the engine to expose the clutch and spring
Removed old clutch shoes and spring
Put new shoes and hooked up new spring to tension the shoes
Just reversed everything else to go back together
P
... Read moreut new air filter in
Read less
Did you find this story helpful?
Thank you for voting!
End guard broke off from years of use; spark arrestor became clogged from use; filter was due for replacement; filter housing was cracked from use
Removed old parts and cleaned entire assembly with mineral spirits and blew it off with compressed air. Then replaced all parts with new ones including new bolts, screws, washers and nuts provided. Inserted new spark arrestor in muffler. Applied new decal label where indicated. Oiled new filter and installed it in place. Machine looks and
... Read more runs as good as new.
Remove the air filter cover, then remove the air filter. Before you install the new filter, place it in a plastic bag with some oil in it. Close the bag and saturate the filter with the oil. Remove the filter form the bag, and using paper towels or a rag, squeeze the excess oil out of the filter. Then install it. And install the filter co
... Read morever
Remove the air filter cover, then remove the old air filter. Take the new filter and put it in a plastic bag with a little oil in it. Saturate the filter with the oil, then remove it, and squeeze all of the excess oil from the filter with a clean rag. Install the air filter and replace the filter cover
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
