Part Location Diagram of A056000521 Shindaiwa Clutch Assembly
See part C-801 in the diagram
Replacing your Shindaiwa Trimmer Clutch Assembly
( Grid squares measure 1x1 inch )

Clutch Assembly A056000521

Manufactured by:
Shindaiwa
ERP Number:
ERP11836511
Part Number:
A056000521
Original Equipment Manufacturer ?
  Works with your model  LE231!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(4 rated repairs) ?
  Works with your model   LE231!

Product Description

?

This clutch assembly is an original part from Shindaiwa. Made for use with lawn trimmers, the metal assembly is fitted onto the flywheel and crankshaft assembly. This item helps the trimmer to idle without activating the cutting head. The clutch assembly is sold as an individual item. A nut driver and a pair of pliers are often helpful in making the repair.

Troubleshooting

This part works with the following brands:
  • Shindaiwa
This part works with the following products:
  • Trimmer
  • Hedge Trimmer
  • Brush Cutter
  • Edger
  • Multi-Tool

Videos For installing this part.

?
Replacing your Clutch Assembly

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Clutch went out. Trimmer and all of sudden jerked horrible

Rodney from MOUNTAIN VIEW, Hawaii

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Parts Used:
A056000521
Remove gas tank. All plastic covers. Front comes forward. Just 2 #5 Torx holding clutch. Take pipe wrench hold clutch assembly and remove. And put everything back
Did you find this story helpful?
Thank you for voting!

Worn clutch and gear head

David from Barrigada, Guam

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
A056000521, P021034640
Removed old gear head and clutch and installed new parts.
Did you find this story helpful?
Thank you for voting!

Clutch shoes came apart

Dan from St. James, Missouri

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
A056000521
I removed the four 4mm hex bolts holding the shaft to the engine assembly. I then used the 5 mm hex wrench to remove the two bolts holding the clutch onto the crankshaft of the engine.
I then removed the old clutch, and replaced it with the new one.
Next, I used the supplied thrust washers, and bolts to affix it.
I the n replaced the four 4mm hex bolts that attach the shaft.
I was ready to go after that.
Did you find this story helpful?
Thank you for voting!

trimmer head would not stop spinning

Shon from HILO, Hawaii

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
A056000521, A556001300
removed engine covers, removed trimmer shaft off of engine. replaced clutch assembly and drum. reassembled trimmer.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11836511
Manufacturer Part Number: A056000521
Brand Model Number Description
Shindaiwa 80192 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa 80280 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa 80613 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa 81088 Trimmer - Multi-Tool
Shindaiwa 81742 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa AH230 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AH231 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AH242 Hedge Trimmer - Hedge Trimmer
Shindaiwa AH2510 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AH254 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AHS231 Hedge Trimmer - Hedge Trimmer
Shindaiwa AHS242 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AHS2510 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AHS254 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa B3000 Brush Cutter - O. E. M. Swisher Brushcutters (B)
Shindaiwa BP25 Brush Cutter - Brushcutter
Shindaiwa BP30L-T Brush Cutter - Brushcutter
Shindaiwa C-20 Brush Cutter - Brushcutter
Shindaiwa C-25 Brush Cutter - Brushcutter
Shindaiwa C230 Brush Cutter - Brushcutter
Shindaiwa C242 Brush Cutter - Brushcutter
Shindaiwa C2510 Brush Cutter - Brushcutter
Shindaiwa C254 Brush Cutter - Brushcutter
Shindaiwa C260 Brush Cutter - Brushcutter
Shindaiwa CT2510 Cultivator - Cultivator
Shindaiwa DH230 Hedge Trimmer - Hedge Trimmer
Shindaiwa E3000 Edger - O. E. M. Swisher Lawn Edgers (E)
Shindaiwa F-18 Trimmer - Trimmer
Shindaiwa F230 Trimmer - Trimmer
Shindaiwa HT4000 Hedge Trimmer - O. E. M. Swisher Hedge Trimmers (Ht)