This is an authentic part that is supplied directly by the original equipment manufacturer for Craftsman trimmers. The trigger allows you to control engine speed, which in turn permits you to safely control the speed of the trimmer line. This part is made of plastic and is sold individually. For installation, you will need a screwdriver and a pair of needle nose pliers to aid you.
Troubleshooting
This part works with the following brands:
MTD
Ryobi
Bolens
Craftsman
Yard Machines
Cub Cadet
Yard Man
Troy-Bilt
This part works with the following products:
Trimmer
Part# 791-181807 replaces these:
791-180975, 791-181556, 791-181807,
Videos For installing this part.
?
★
Customer Part Reviews
?
4.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 star
1
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great
Quickly
Guest - September 12, 2020
Verified Purchase
★★★★★
★★★★★
Exact replacement part
Easy fix. This tiny part came in a large paced envelope. Shipping cost were expensive compared with cost of part. Could have shipped item for pennies if smaller packaging used.
Gregory - April 22, 2022
Verified Purchase
★★★★★
★★★★★
Perfect transaction
Easy to order, arrived timely, and was easy to replace.
Guest - June 16, 2022
Verified Purchase
★★★★★
★★★★★
Parts for carry over gas grill carry over tube
I admit I made the mistake of ordering the wrong part. I realized that right after I made the order and contacted your company to cancel so I could order the right part. I was told they couldn't cancel because your orders go out fast. Now I have parts I can't use because you wouldn't exchange them over the phone literally 10 min after I ordered it. If you were so fast shipping stuff out why did it take over a week to get it here. I think your way of doing business and your customer service is pretty crappy. Steve M
Guest - May 8, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Replaced the trigger making sure to match spring to its exact replacement position. The muffler comes off easy with the removal of two screws. New screws and gasket come with the muffler so I installed the new muffler with them. After installing new muffler I had lots of revving power and the ease of a new trigger. Love It!
I took out all of the screws from the handle where the trigger is located. I made sure how the spring and trigger were placed in the handle. I removed the broken trigger and took out the cable. I took the new trigger, put the cable in it and put it and the spring in the handle. And put the handle together. I used some soapy water to slid
... Read moree on the grip. I took out the screws that hold the filter cover and took out the old filter and put in the new one. Then put the cover back on.
1. Remove screws securing the trigger assembly.
2. Pull assembly apart.
3. Remove throttle cable and spring from broken trigger.
4. Attach new trigger and reassemble.
Remove the screws from the throttle housing. Look close to see how the throttle trigger spring is attached. Remove the throttle cable from the broken trigger. Remove the broken throttle trigger and install the new one, install the throttle cable in the new trigger. Then assemble the housing. Done!
Remove the screws from the handle assembly and separate. Make note how the spring is installed before removing it. Remove the trigger and spring and the throttle cable from the broken trigger. Place the throttle cable in the new trigger, then place the new lever and spring in the handle. Screw the handle back together. Unscrew the bump kn
... Read moreob and remove it. Take the old spool out. Place the new spool in the housing, and thread some of the cutting line thru the eyelets. Thread the bump knob back on. And you\'re done.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9306549
Manufacturer Part Number: 791-181807
Trimmer
- MTD String Trimmer Model 41AD100G763 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
