Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
The parts are exact fit as original
After removing the old broken parts and replacing them with the new parts the trimmer is working just like it did on day one. Saved a lot of money fixing it rather that getting a whole new trimmer.
Guest - August 16, 2021
Verified Purchase
★★★★★
★★★★★
Worked as expected
Price was higher than necessary.
Guest - August 30, 2022
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(9 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
When I took the head of the string trimmer apart, I realized the slider was bent and a small spring was missing. I had to destroy the e-clip to get it off and out of the way for the slider, so I just made sure I bought one with the order. Once I got the e-clip off, everything went into place just as the diagram shows. String trimmer runs
... Read morelike new. I am stoked that I was able to find these part for replacement.
Remove bump feed knob.
Remove reel and line assembly.
Remove c-clip.
Remove spring.
Remove e-clip.
Remove slider.
Remove small speed spool springs.
Reinstalled with some new parts and all is well.
Remove bump knob, removed string spool, remove E clip on shaft, remove plunger & spring.
Then remove C clip, pull out slider & 2 slider springs below it. Thoroughly clean the body of the trimmer head.
after thoroughly cleaning, spray a little dry lube on the spring & slider grooves inside the head, Install slider springs
... Read more, install slider (Making sure the spring tabs on slider are over the top of the slider springs), while holding slider & springs in, attach the C clip to shaft that holds the slider in place, but lets it freely slide. Then install plunger spring & plunger. Hold plunger down while attaching the E clip onto the shaft. push plunger & watch slider move to one side, then back when plunger comes back up. Basically, verify operation. If all is good, Install spool & bump knob. Then install trimmer line as normal... Enjoy your newly repaired bump feed head that only takes a slight \"bump\" to feed more line! :)
Removed all parts, ordered, received parts in a USA address to minimize costs. A friend was able to bring them back to Canada. With the exploded view of the component, a bit difficult part was to install the e-clip. That said, straightforward repair
I just followed the helpful video instructions provided by eReplacementParts and everything went smoothly! I could have figured it out by myself but the video makes things a bit easier for sure. https://www.youtube.com/watch?v=ZOsyqwNhUZc
Trimmer
- MTD String Trimmer Model 41AD705G977 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 791-181532 MTD E-Clip")
_WW_2.gif "Part Location Diagram of 791-181532 MTD E-Clip")
