This is sold as a set that contains all the necessary parts. They are OEM parts sourced directly from the manufacturer and used in blowers, cultivators, edgers, trimmers, and vacuums made by Ryobi, Troy-Bilt, Yard Man, Bolens, MTD, and Yard Machines. It might require an allen wrench and a socket set?? to replace these items. These are made of durable materials and will require replacing if they become broken.
I filled my blower vac with the wrong gas as I have three different fuel cans for the various pieces of equip that I own. The piston ceased up and the I was going to just toss it and buy a new one. However, a friend told me it was an easy fix so I decided to give it a try.
I reviewed a video that ereplacement parts had on
... Read more installing new pistons which was quite helpful and then tackled the job. It took me a couple hours to tear down and then rebuild and was pretty simple. Putting the case back on at reconnecting the throttle cable was the most tricky part but just took a bit of fiddling.
After a few pulls it started up and is running better than it did when new. It would not run well at full throttle and after looking at the old piston, I think the rings may have been a problem for some time.
Read less
Did you find this story helpful?
Thank you for voting!
Blower wouldn\'t stay started. Bog down when applying throttle
To fix my bogging problem I bought a carburetor and a complete kit to rebuild the throttle bottle assembly. To further maintenance the blower, I thought I would check the spark arrestor and make sure the exhaust port was not clogged, which entailed removing the exhaust muffler. Well, depending on the age of your small engine, the exhaus
... Read moret screws will seize into the motor cylinder and applying torque to remove them only results in breaking off the bolt head, which is what I did. So, I had to by an engine cylinder assembly. Job took about 2 hours but if you are handy with a wrench, make sure you keep of with the screws and take pictures, this was a easy job. In short, my blower runs new again. For about 30 dollars, I have extended the life of this unit for at least 5 more season, or more.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9130055
Manufacturer Part Number: 753-04814
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
