Trimmer Exhaust Gasket 753-04619

To fix my bogging problem I bought a carburetor and a complete kit to rebuild the throttle bottle assembly. To further maintenance the blower, I thought I would check the spark arrestor and make sure the exhaust port was not clogged, which entailed removing the exhaust muffler. Well, depending on the age of your small engine, the exhaus ... Read more t screws will seize into the motor cylinder and applying torque to remove them only results in breaking off the bolt head, which is what I did. So, I had to by an engine cylinder assembly. Job took about 2 hours but if you are handy with a wrench, make sure you keep of with the screws and take pictures, this was a easy job. In short, my blower runs new again. For about 30 dollars, I have extended the life of this unit for at least 5 more season, or more.

Used screw driver to install the muffler.