Part Location Diagram of 575261201 Husqvarna Kit, Driveshaft Upper
See part B-12 in the diagram
( Grid squares measure 1x1 inch )

Kit, Driveshaft Upper 575261201

Manufactured by:
Husqvarna
ERP Number:
ERP9034490
Part Number:
575261201
Original Equipment Manufacturer ?
  Works with your model  128CD!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(7 rated repairs) ?
  Works with your model   128CD!

Product Description

?

This genuine item is supplied by the original equipment manufacturer for use with Husqvarna trimmers. It is a high-quality replacement for a missing or a faulty upper shaft that was included with a new unit. The part houses the flexible shaft that rotates the cutting head, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. This high-quality kit is made of durable metal and is sold individually, keep in mind it includes the housing and the flexible shaft.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
This part works with the following products:
  • Trimmer
  • Edger
Part# 575261201 replaces these:
545003370, 545003379, 545006046, 5752625-01, 575262501,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lower shaft won't connect to upper shaft.
Danny For model number 128 LD - November 20, 2023

Hi Danny, Thank you for the question. We suggest checking the Upper Driveshaft Part Number: 575261201 for wear or damage where the Screw Knob is located. We hope this helps!

eReplacementParts Team
November 20, 2023

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(7 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Upper drive shaft slipping in connector to lower drive shaft.

John from Advance, North Carolina

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
575261201
Replaced upper drive shaft kit to engine. Dissemble motor head from drive shaft, including throttle cable and trigger. Reassembled.
Did you find this story helpful?
Thank you for voting!

Head of the driveshaft crack and was unable to deliver torque to trimmer spool

Peter from Fort Mill, South Carolina

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
575261201
Loosen throttle retaining screws and screws attaching driveshaft to engine. Slide old driveshaft out. Slide new driveshaft into engine base aligning screw holes as the original. Reattach throttle screws. Make sure you push new driveshaft towards engine to engage new driveshaft. Start engine to ensure new driveshaft spins when clutch is en gaged.
Did you find this story helpful?
Thank you for voting!

Trimmer shaft had become bent over the years

Josh from Fredericksburg, Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
545180848, 575261201
1. Disconnected lower shaft and trimmer head from upper shaft.
2. Removed trigger assembly (several hex screws).
3. Removed engine cover pieces (several hex screws).
4. Removed old upper shaft and replaced with new upper shaft.
5. Replaced engine cover pieces.
6. Replaced trigger assembly. (*Note: Ensure trigger cable and kill switch wires are firmly seated in the trigger assembly and that trigger isn\'t crimped or under tension before setting trigger assembly screws.)
7. Removed trimmer head from lower shaft.
8. Replaced trimmer head onto new shaft.
9. Connected lower shaft to upper shaft.
Did you find this story helpful?
Thank you for voting!

Shaft was bent.

Kyle from Muncie, Indiana

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
545180848, 575261201
1. Removed lower driveshaft from upper driveshaft.
2. Removed the upper driveshaft. Try to keep the throttle housing on. This can be time consuming if you are not careful.
3. Insert new upper drive shaft into trimmer.
4. Insert lower driveshaft into upper driveshaft.
5. Place the trimmer guard and head on the new lower driveshaft.
Did you find this story helpful?
Thank you for voting!

Shaft was stripped.

Phillip from WISE, Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
575261201
Removed about 5 screws to remove the shaft and simply placed the new one. Very easy.
Did you find this story helpful?
Thank you for voting!

Worn shaft

Fernando from Fayetteville, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
575261201
Removed old shaft and put the new one in.
Did you find this story helpful?
Thank you for voting!

Flex shaft would not stay engaged

Jacky from Tuscumbia, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
575261201, 530150253
removed old drive shaft and replace with new one
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9034490
Manufacturer Part Number: 575261201
Brand Model Number Description
Husqvarna 125LD Trimmer - 125 Ld (2008-11)
Husqvarna 128CD Trimmer - 28cc Gas Line Lawn Trimmer
Husqvarna 128CD-LOWES Trimmer - Gas Line Trimmer
Husqvarna 128LD Trimmer - Trimmer/Edger
Husqvarna 128LD-LOWES Trimmer - Gas Line Trimmer
Husqvarna 128PS Pole Saw - 128ps
Husqvarna 545192138 Trimmer - Husqvarna String Trimmer Model 545192138/2009-03 (545192138/200903, 545192138/2009 03) Parts
Husqvarna 545192139 Trimmer - Husqvarna String Trimmer Model 545192139 Parts
Husqvarna 545192149 Trimmer - Husqvarna String Trimmer Model 545192149 Parts
Husqvarna 545192186 Trimmer - Husqvarna String Trimmer Model 545192186/2009-01 (545192186/200901, 545192186/2009 01) Parts
Husqvarna 545192187 Trimmer - Husqvarna String Trimmer Model 545192187 Parts