This is an authentic replacement part manufactured for use with Husqvarna trimmers. The lower shaft kit is used to house the driveshaft and this kit includes the inner driveshaft housing and grease to reduce friction between the driveshaft and housing. This lower shaft kit is available as an individual replacement part.
Took trimmer head off of old shaft, transferred flex drive cable from old shaft to new shaft and reassembled unit. very simple process. less than 30 minutes to complete.
1. Disconnected lower shaft and trimmer head from upper shaft.
2. Removed trigger assembly (several hex screws).
3. Removed engine cover pieces (several hex screws).
4. Removed old upper shaft and replaced with new upper shaft.
5. Replaced engine cover pieces.
6. Replaced trigger assembly. (*Note:
... Read moreEnsure trigger cable and kill switch wires are firmly seated in the trigger assembly and that trigger isn\'t crimped or under tension before setting trigger assembly screws.)
7. Removed trimmer head from lower shaft.
8. Replaced trimmer head onto new shaft.
9. Connected lower shaft to upper shaft.
1. Removed lower driveshaft from upper driveshaft.
2. Removed the upper driveshaft. Try to keep the throttle housing on. This can be time consuming if you are not careful.
3. Insert new upper drive shaft into trimmer.
4. Insert lower driveshaft into upper driveshaft.
5. Place the trimmer guard and head on the new
... Read morelower driveshaft.
Husqvarna 128ld
-remove lower shaft from the upper.
-take the t15 and t25 torque bit to remove the 2 small screws on the neck of the head to release the head from the lower shaft.
-pull the metal drive shaft cable out through the bottom of the old lower shaft. The cable will only remove one way.
-grease the cable
... Read morebefore inserting into the bottom end of the new lower shaft.
-place the trimmer head onto the bottom of the lower shaft and reinsert both screws. Try to align the smaller of the screws (t15 torque screw) with the push button release at the top of the shaft before tightening so the trimmer head is not turned to one of the sides.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9289275
Manufacturer Part Number: 545180848
Trimmer
- Husqvarna String Trimmer Model 545192187 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/parts/lawn-and-garden/trimmer/wheels-and-rollers/"},{"position":2,"name":"545180848","title":"545180848","url":""}]
