Part Location Diagram of 545081897 Husqvarna Trimmer Fuel Line Kit
See part A-17 in the diagram
( Grid squares measure 1x1 inch )

Trimmer Fuel Line Kit 545081897

Manufactured by:
Husqvarna
ERP Number:
ERP9030662
Part Number:
545081897
Original Equipment Manufacturer ?
  Works with your model  125LSST!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(15 rated repairs) ?
  Works with your model   125LSST!

Product Description

?

This is a genuine OEM replacement part designed for Husqvarna gas trimmers/edgers. The purpose of this fuel line is to to supply fuel from the tank to carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. It is made out of plastic and it is sold individually. Please note the fuel filter is sold separately. Over time the fuel lines will deteriorate and become brittle so they would need to be replaced.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Poulan
  • Craftsman
This part works with the following products:
  • Trimmer
  • Brush Cutter
  • Edger
Part# 545081897 replaces these:
545030201, 545081897,

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(15 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Fuel line was leaking (Husqvarna 125L)

Jerry from Hampton , Virginia

7 of 7 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
545081897, 530150253
Not very difficult. Removed gas tank. Pried fuel line from tank. Pulled fuel filter from existing fuel line and installed on new fuel line. Pushed new fuel line into tank and reinstalled tank. Worked perfectly!
Did you find this story helpful?
Thank you for voting!

Leaking fuel line

Danny from Harrisonburg, Virginia

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
545081897
Remove the fuel line grommet from the fuel tank and pull out the leaking fuel line from the tank. Place the fuel filter on the new fuel line that goes into the tank. Insert the fuel filter and line into the tank, making sure that the filter is facing the front of the tank. Press the grommet into the tank making sure that the fuel line wit h the tab on it is facing towards the fuel tank cap. Push the fuel lines onto the carburetor so the the fuel line with the tab on it is attached to the to the purge stem on the carburetor.
Did you find this story helpful?
Thank you for voting!

Starter paws would not engage

Peter from Logan, Ohio

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
545180844, 545081897, 545160301
Remove recoil Starter, 2 screws. Place a piston stop in spark plug hole or a length of small diameter rope into cylinder to stop upward motion of piston, Remove 8 mm flanged nut, remove starter cup assy and or just replace spring in starter cup. Re-assemble.
Did you find this story helpful?
Thank you for voting!

Cracked gas line

Ken from Sutter Creek , California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
545081897
Pulled off old old with pliers and screwdriver. Replaced with new one. Directions were good, told you which line went where. Pretty easy.
Did you find this story helpful?
Thank you for voting!

The trimmer would noy prime properly and when I could get it started the trimmer would not idle.

JOHN from CORAOPOLIS, Pennsylvania

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1) Remover air filter cover and air filter.
2) Take the 2 nuts off that secure the air filter housing to the engine. Remove the 2 screws on the primer bulb and replace.
3) Remove the primer and fuel line from the tank and carburetor.
4) Install the fuel filter to the fuel line and reinstall in the tank. Attach the lines to the carburetor.
5) Reinstall air filter housing, filter and cover.

Runs great!
Did you find this story helpful?
Thank you for voting!

Fuel line leak

John from KISSIMMEE, Florida

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
530095646, 545081897
Took off carb. Remove old fuel line from carb and tank and replaced with new line. Change fuel filter since I put on a new line it is always good to change the filter at this time.
Did you find this story helpful?
Thank you for voting!

Fuel line repairs on small engines

Anthony from Louisville, Kentucky

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
545081897
I do small engine repairs and historically one of the biggest problems has been finding the correct replacement parts for the wide variety of machines on the market. Sometime I would need a $4.00 part and spend all day looking for it. E-replacement parts.com has made the job simple by providing on-line access to parts diagrams with part numbers and pricing for almost anything. The fast delivery options are a plus as well. Good job!
Did you find this story helpful?
Thank you for voting!

Old fuel line broke when replacing the carburetor. Replaced the fuel line. Runs like a champ.

Charles from Woodway, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
545081897
Removed the carburetor and popped the old fuel line out of the tank. Installed the new filter to the line. Re-inserted into the tank and installed it to the carburetor. Locked everything down. Runs perfectly. I would suggest downloading the parts list to your equipment. That will help when you want to aquire the appropriate part. Ththis company really comes thru for their customers.
Did you find this story helpful?
Thank you for voting!

Suction tube had a pinhole that prevented the primer bulb from working.

Philip from LITHIA SPRINGS, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
545081897
Removed air filter.
Removed two carburetor retaining nuts.
Removed carburetor giving access to the fuel tank and fuel lines.
Removed old fuel lines.
Reversed procedure for assembly.
Did you find this story helpful?
Thank you for voting!

Fuel line leak

d from saratoga, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
545081897
Removed housing and rope assembly to gain access to fuel tank. Pulled off fuel line from carburetor and reinstalled new fuel line as instructed. Most difficult part was getting proper tools - hex screwdrivers -in order to remove housing
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9030662
Manufacturer Part Number: 545081897
Brand Model Number Description
Husqvarna 124C Trimmer - Husqvarna String Trimmer Model 124C/2006-05 (124C/200605, 124C/2006 05) Parts
Husqvarna 124L Trimmer - Husqvarna String Trimmer Model 124L/2006-05 (124L/200605, 124L/2006 05) Parts
Husqvarna 125C Trimmer - Trimmer
Husqvarna 125C-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125E Edger - Edger
Husqvarna 125E-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125L Trimmer - Trimmer
Husqvarna 125LD Trimmer - 125 Ld, 20061000001-20064900000
Husqvarna 125LDX Trimmer - Husqvarna String Trimmer Model 125LDX Parts
Husqvarna 125LDXTEST Trimmer - 125ldx Test (2010-06)
Husqvarna 125LSST Trimmer - Gas Line Trimmer
Husqvarna 125R Brush Cutter - Brushcutter
Husqvarna 125R-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125RJ Brush Cutter - Brushcutter
Husqvarna 128C Trimmer - 128 C (2008-09)
Husqvarna 128L Trimmer - Husqvarna String Trimmer Model 128L/2008-09 (128L/200809, 128L/2008 09) Parts
Husqvarna 128LD Trimmer - 128 Ld (Usa, Canada) (Lowes) (2008-11)
Husqvarna 128R Brush Cutter - 128 R (Canada Only) (2009-09)
Craftsman 358791300 Trimmer - Trimmer
Craftsman 358791980 Trimmer - Trimmer
Husqvarna 530165592 Trimmer - Husqvarna String Trimmer Model 530165592 Parts
Husqvarna 530IPX Pole Saw - 530ipx
Husqvarna 545014318 Trimmer - Husqvarna String Trimmer Model 545014318 Parts
Husqvarna 545014388 Edger - Husqvarna Edger Model 545014388 Parts
Husqvarna 545103447 Trimmer - Husqvarna String Trimmer Model 545103447 Parts
Jonsered BC2126 Brush Cutter - Brushcutter
Jonsered BC2126CAN Brush Cutter - Brushcutter
Jonsered BC2126EUAU Brush Cutter - Brushcutter
Jonsered BC2126ROW Brush Cutter - Brushcutter
Jonsered BC2126US Brush Cutter - Brushcutter