This is a genuine OEM replacement part, it is sold individually. This spring is used in a number of String Trimmers and Brush Cutters. This Spring is part of the String advancing system. It is placed in between the spool and the spool housing. Over time the spring will lose its tension and will have to be replaced.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Correct parts.
The parts were put in. Need to put the gas trimmer together yet. Great service.
Guest - May 20, 2019
Verified Purchase
★★★★★
★★★★★
Excellent response
Couldn't ask for anything better.
Guest - May 22, 2019
Verified Purchase
★★★★★
★★★★★
Ryobi Parts
All of the parts I ordered were received in great shape and fit perfect. Thank you.
Guest - June 3, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair.
Parts I ordered were a much better design than original... Works better than ever. thanks
James - June 8, 2019
Verified Purchase
★★★★★
★★★★★
exactly what I needed
perfect fit
Guest - June 14, 2019
Verified Purchase
★★★★★
★★★★★
Hard to find part
Packed so it didn't bend and arrived in about a week
Guest - July 27, 2019
Verified Purchase
★★★★★
★★★★★
Quick to receive
Unfortunately, the part I ordered is not the part I thought I needed, so I can't speak to whether it worked well or not.
Guest - August 26, 2019
Verified Purchase
★★★★★
★★★★★
excellent buy and good material in the part
arrived quickly, very good and well made product. Will order future parts again from Replacement Parts
Guest - September 6, 2019
Verified Purchase
★★★★★
★★★★★
Replace primer bulb and spring for line feed
Both of the parts fit perfectly and worked as expected. Obviously saved a lot of money by being able to do the repair myself. You detailed diagrams gave me confidence I was buying the correct replacements parts. Those were very helpful. Overall, a great experience.
Guest - September 25, 2019
Verified Purchase
★★★★★
★★★★★
Flawless transaction and repair
Exactly what was ordered delivered as promised.
Guest - October 10, 2019
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed bolt from line housing
Remove the line spool
Remove housing
Reverse process while using new spring and housing
Feed line through eyelets in housing and put spoil in place
Install bolt to secure parts in place
Separate two halves of plastic throttle trigger assembly. Remove screw securing power head to aluminum driveshaft tube, separate head from tube. Slide rubber guard off tube. Remove pressed-in plastic cable holder. Insert new throttle cable in rubber guard, then slide guard, with cable inside it, onto tube. Reattach power head to tube. Att
... Read moreach throttle cable onto carburetor. Route throttle cable into trigger assembly, reinstall screws to secure halves. Press plastic cable holder into place. Take pictures before disassembly, can be helpful at times.
Read less
Did you find this story helpful?
Thank you for voting!
Outer spool eyelet was worn to the point the line on the spool would come out at the top.
1. Removed all the parts per video on eReplacement web site, had to buy split pliers
2. Watched video to put new parts on per video and I printed the instructions. Both were excellent.
Had to buy 1/2 inch metal pipe and cut three or four inch piece off with hack saw to use to push retainer over the shaft.
3. Put it back
... Read moretogether, all parts in a short period of time. Used it and it worked remarkably. I am happy I did it and I\'m excited to have repaired it myself rather than buy a new one.
Hopefully I can keep it another 19 or 20 years.
Read less
Did you find this story helpful?
Thank you for voting!
The filter cover wouldn\'t stay on because the filter base was broken.
1. Removed the 2 screws from the filter base
2. Removed the filter base
3. Cleaned around the carburetor
4. Screwed on the new filter base
5. Replaces the filter cover
Remove the bump head (LH thread). Remove the spool and spring. Pull off the upper housing. Press the new housing on. Load spring into the spool. Thread a few inches of line thru the upper housing eyelets. Then press the spool and spring up, and screw on the bump head.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/parts/lawn-and-garden/trimmer/springs-and-shock-absorbers/"},{"position":2,"name":"06713","title":"06713","url":""}]
